Shopping.co.uk

Ultratape Rhino Plumbers PTFE Thread Sealing Tape - 12mm x 12m 2pk

Ultratape Rhino Plumbers PTFE Thread Sealing Tape - 12mm x 12m 2pk

Trade Quality PTFE Plumbers Tape (Water) approved to BS7786 & EN751-3 and WRAS potable water stand...

Best current price£6.59from OnBuy.com

Best offers

Shopping.co.uk recommended and popular offers

All Offers

3 offers from £6.59 - £6.73

View price history by clicking the chart icon.

OnBuy.comUltratape Rhino Plumbers Ptfe Thread Sealing Tape 12Mm X 12M 2Pk
Free delivery in 1–3 days
£6.59
Visit shop
B&Q - Ultratape Rhino Plumbers Ptfe Thread Sealing Tape 12mm X 12M 2Pk One Colour (One Size)
Free delivery in 1–3 days
£6.73
Visit shop

Product Information

Full details

This Ultratape Rhino Plumbers PTFE Thread Sealing Tape is designed for professional plumbers and DIY enthusiasts working with water systems. Its key benefit is ensuring leak-free seals on threaded pipe connections, approved for potable water use. A caveat is that proper application technique is crucial for optimal performance.

All features

Model Part NumberRINO1212
BrandUltratape

Extended Product Information

FAQs

Is this tape suitable for gas lines?

This specific tape is approved for potable water systems. For gas lines, Ultratape offers specialized gas-approved PTFE tape.

How many wraps of tape should I use?

Generally, 3 to 5 wraps are recommended. The exact number may vary slightly depending on the thread pitch and the desired seal tightness. Always ensure the tape is taut and overlaps slightly.

Can I use this tape on plastic threads?

Yes, this tape is suitable for sealing both metal and plastic threaded connections commonly found in water systems.

What does WRAS approved mean?

WRAS (Water Regulations Advisory Scheme) approval signifies that the product meets the Water Supply (Water Fittings) Regulations 1999 in England and Wales, ensuring it is safe for use in contact with drinking water.

How long is each roll of tape?

Each roll measures 12 meters (approximately 39 feet) in length.

What is the width of the tape?

The tape is 12mm (approximately 0.47 inches) wide.

Can I reuse the tape if I need to adjust a fitting?

It is best practice to remove the old tape and apply a fresh layer whenever a fitting is disassembled and reassembled to ensure a reliable seal.

Troubleshooting

Water leak after assembly

Ensure adequate tape was applied (3-5 wraps) and that it was wrapped in the correct direction (clockwise on male threads). Check that the fitting was tightened sufficiently.

Tape tears during application

Apply the tape with consistent, moderate tension. If the tape is old or has been stored improperly, it may be brittle. Try a new roll.

Fitting is difficult to tighten

The tape may have been applied too thickly or unevenly. Loosen the fitting, remove the tape, and reapply a thinner, more consistent layer.

Pros and Cons

Pros

  • Ensures reliable, leak-free seals on threaded pipe joints.
  • Certified for use in potable (drinking) water systems.
  • Durable and resistant to corrosion and chemical degradation.
  • Comes in a convenient 2-pack for multiple uses.
  • Meets important industry safety and quality standards.

Cons

  • Requires careful application to avoid leaks.
  • May not be suitable for extremely high-pressure or high-temperature applications beyond standard plumbing.
  • Only suitable for threaded connections, not compression fittings.

Setup, Compatibility & Care Instructions

Setup:

  1. Ensure threads on both pipe and fitting are clean and free from debris.
  2. For standard NPT (National Pipe Taper) or BSP (British Standard Pipe) threads, begin wrapping the tape on the *male* threaded component.
  3. Start at the end of the threads and wrap the tape *in the direction of the threads* (clockwise for standard threads).
  4. Apply 3-5 wraps, ensuring each wrap slightly overlaps the previous one and is stretched taut to conform to the threads.
  5. Trim any excess tape if necessary.
  6. Screw the fitting onto the pipe hand-tight, then use a wrench for final tightening. The tape will lubricate the threads, aiding in seating the fitting.

Compatibility:

  • Compatible with most metal and plastic threaded fittings used in standard water supply systems.
  • Approved for potable water applications.
  • Not recommended for use with certain aggressive chemicals or fuels where specialized tapes are required.

Care:

  • Store rolls in their original packaging or a cool, dry place to prevent dust and damage.
  • Avoid prolonged exposure to direct sunlight or extreme temperatures.

Price History

DatePrice
Visit shop