Mexco TDXCEL M14 Dry Diamond Tile Drill Bit - 6mm

This drill bit is designed for use on porcelain, ceramic tiles, and other hard materials.

No, this drill bit is designed for dry drilling, eliminating the need for water.

It is compatible with angle grinders with an M14 thread or mains powered drills using an M14 Chuck Adaptor with Hex Adaptor.

If using an angle grinder, screw the M14 thread directly onto your angle grinder. If using a mains drill, use an M14 Chuck Adaptor with Hex Adaptor.

Check material compatibility, reduce pressure, and ensure the bit is properly attached.

Clean the bit after each use and store it in a dry place to prevent corrosion. Avoid excessive pressure while drilling.

This drill bit is not recommended for use on glass. It is specifically designed for hard tiles and similar materials.

Check the material compatibility. Ensure you are drilling into porcelain, ceramic, or another suitable hard material. Also, check the speed and pressure being applied. Reduce pressure and speed if necessary.

Reduce the pressure on the drill. Allow the bit to cool down if it becomes too hot. Avoid continuous drilling; take breaks.

Ensure the drill bit is properly seated and secured in the angle grinder or drill. Start drilling at a slight angle to allow the bit to 'bite' before straightening it.