Car Gods Black Wax Diamond Polish Scratch Remover Paint Protection - 2x 500mL

No, Car Gods Erebus is specifically formulated for gloss black automotive paintwork only. Using it on other colors may result in an uneven appearance or discoloration.

The surface must be thoroughly washed and dried. Ensure there are no contaminants like dirt, dust, or wax residues left on the paintwork before application.

The product provides a layer of protection that can last under extreme conditions, but the longevity will depend on environmental factors and how often the vehicle is washed or exposed to harsh elements. Regular maintenance washes will help preserve the finish.

No, this product is not suitable for matte paintwork. It is designed exclusively for gloss finishes.

A haze is a light, powdery film that appears on the paint surface as the product dries. You should buff the product off once this haze has formed but before it becomes deeply ingrained or difficult to remove.

While Erebus provides protection, for maximum durability, you might consider applying a dedicated sealant or wax over it once it has fully cured. However, test compatibility first.

This product is sold as a 2x 500mL pack.

Ensure you are not applying in direct sunlight or on a hot surface. Work in smaller sections and buff off promptly after it hazes. Ensure your microfibre cloth is clean and suitable for buffing.

Immediately wipe away any overspray from trim with a damp cloth before it dries. If residue has dried, use a dedicated trim cleaner for removal. Always use a precise application method to avoid trim contact.

Ensure the paint surface was thoroughly cleaned and free of contaminants before application. The final buffing step is crucial; use a clean, high-quality microfibre cloth and buff with moderate pressure. For duller paint, a pre-polish may be beneficial.

This may indicate the product was applied too thickly or allowed to dry for too long. Try buffing with a slightly damp (with water) microfibre cloth initially, followed by a dry buffing for the final shine. Ensure adequate ventilation if working in a humid environment.