RJ45 Panel Mount - Cat6

An RJ45 Panel Mount is used to create a clean, accessible, and professional network connection point on a wall plate, patch panel, or enclosure. It allows for easy extension or connection of Ethernet cables.

While the panel mount is specifically rated for Cat 6, it may physically accept Cat 7 connectors. However, to guarantee 10/100/1000 Mbps speeds, using Cat 6 cables is recommended. Performance with higher-rated cables is not guaranteed by this specific mount.

No, this is a pass-through panel mount. You simply plug an existing RJ45 terminated cable into the back and another into the front. No re-termination is required.

You will need to create a cut-out of approximately 15mm x 16mm for the panel mount to fit securely.

The product description does not specify PoE support. While it passes data signals, its ability to support PoE power levels depends on its internal construction and may not be certified for PoE applications.

This RJ45 Panel Mount supports speeds up to 10/100/1000 Mbps (1 Gigabit per second).

Verify that both ends of the Ethernet cable are fully seated in the RJ45 ports on the panel mount and on your devices. Ensure the connected network infrastructure (router, switch) is functioning correctly. Test with a known working cable.

Confirm that the connected cables are Cat 6 or higher for optimal Gigabit speeds. Check for any damage to the cable or the panel mount's internal contacts. Ensure your network devices and infrastructure also support Gigabit speeds.

Double-check the required cut-out dimensions (15x16mm). Ensure the cut-out is precise and free of obstructions. If using a different panel, verify its compatibility with the panel mount's specifications.