CarPlan Car Paint No Wax Polish Gloss Valeting Spray Sealant With Microfibre Cloth X3 - SGB600

The shine and protection can last for up to 12 months, provided the product is applied correctly to a clean surface and the vehicle is maintained appropriately.

This product is designed for exterior use on paintwork, rubber, lights, trim, chrome, and glass. It is not intended for interior surfaces.

If your paintwork is dull or needs restoring, it is recommended to use a product like T-Cut first to bring back the original shine. For general maintenance on a clean car, direct application is sufficient.

It is recommended to use approximately 2-3 squirts per panel for optimal coverage and to avoid over-application.

It is best to apply the product in moderate temperatures. Avoid application in freezing conditions or on very hot surfaces, as this can affect performance and finish.

Wash the microfibre cloths separately from other laundry using a mild detergent. Avoid using fabric softeners, as they can clog the microfibres and reduce their effectiveness.

The product utilizes patented nanomeric technology which forms a durable, protective layer on the car's surface, repelling elements that cause dullness and degradation.

Do not apply Super Gloss to the windscreen or rear window. If smearing occurs, clean the glass thoroughly with a dedicated glass cleaner and a clean microfibre cloth.

Ensure the product was applied sparingly and allowed to haze slightly before buffing. Use a clean, dry section of the microfibre cloth for buffing. Avoid applying in direct sunlight or on a hot surface.

Durability can be affected by environmental conditions, washing frequency, and the car's exposure. Ensure the initial application was correct and that the car is washed gently, avoiding harsh chemicals that could strip the sealant.

Wipe away any overspray from trim immediately after application using a damp cloth or a dedicated trim cleaner before it dries. Buffing with a dry cloth should remove minor streaks.