Best current price£189.99from B&Q
Shopping.co.uk recommended and popular offers
B&Q£189.99Visit shop B&Q - Lowara Ecocirc M 25-6/130 Heating Pump 130mm 6M Head Cast Iron 60B0L1011
Visit shop2 offers from £189.99 - £199.99
View price history by clicking the chart icon.
The Lowara Ecocirc M 25-6/130 is a cast iron central heating circulating pump designed for small to medium domestic properties, offering a robust, reliable, and cost-efficient solution for circulating water in heating systems. Its key benefit lies in its simplicity of use with a single control knob and multi-color LED status indicator, alongside efficient operation with a low power consumption. A potential caveat for some users might be its maximum 6-meter head, which may not be suitable for larger or more complex heating systems.
| Model Part Number | 60B0L1011 |
|---|---|
| Brand | Lowara |
The Lowara Ecocirc M 25-6/130 has a maximum head of 6 meters.
The modes are Proportional Pressure (for TRVs), Constant Pressure (for underfloor heating), and Fixed Speed (for boiler feed/single-pipe systems). Select the mode best suited to your specific heating system configuration.
The multicolor LED indicator on the pump face shows the status. A solid green light indicates the circulator is working properly.
No, this pump is specifically designed for circulating water in central heating systems and is not suitable for potable hot water applications.
A blinking green LED indicates that the automatic air-purge function is currently running.
The pump has a low power consumption with a maximum power limit of 34W.
The port nominal diameter is 25mm, and the port-to-port dimension is 130mm.
The pump requires minimal maintenance due to its design and automatic air-venting. However, regular checks of the central heating system and keeping the pump exterior clean are recommended.
Check the electrical connection and ensure the power supply is active. Verify that the pump is not in standby mode (indicated by a blinking yellow LED) and that the system has power. Ensure the pump is not showing a red 'failure' light.
Ensure the correct operating mode and speed are selected for your system type. Check for air in the system; the automatic air-venting function should address this, but manual bleeding of radiators may be necessary. Verify that no valves in the system are closed and that there are no blockages in the pipework.
Noises can indicate trapped air in the system. Allow the automatic air-purging function to operate, or manually bleed radiators. If the noise persists, check for blockages or debris in the impeller (requires professional service).
A red light indicates a pump failure or a dry run condition. Check the electrical supply and ensure the pump is submerged in water (not running dry). If the issue persists, consult a qualified heating engineer as internal components may require inspection or replacement.
Setup:
Compatibility:
Care:
