Osmaweld Pipe Bracket - White - 40mm
Best current price£1.22from Travis Perkins
Best offers
Shopping.co.uk recommended and popular offers
Travis Perkins£1.22Visit shop Osmaweld 5Z081W 40mm Pipe Bracket White
Visit shopTravis Perkins£1.22Visit shop One Offer
1 offer from £1.22
View price history by clicking the chart icon.
Product Information
Full details
This guide is for anyone using the Wavin Osmaweld Pipe Bracket - White - 40mm. It helps you understand how to effectively install and maintain this bracket for your ABS OsmaWeld pipe systems. The key benefit is a secure and reliable support system, ensuring the longevity of your plumbing. Note that the bracket is designed for specific pipe sizes and materials; improper use may compromise its effectiveness.
All features
| Model Part Number | 5Z081w |
|---|---|
| Brand | Wavin |
Extended Product Information
FAQs
What is the primary function of this pipe bracket?
The primary function is to support ABS OsmaWeld pipes, preventing sagging and ensuring a secure plumbing system.
What material is this bracket made of?
The bracket is made of high-grade ABS plastic.
What is the maximum temperature the bracket can withstand?
The bracket is suitable for intermittent water discharges up to 90°C.
How often should I space the brackets?
Brackets should be installed at 1.2m intervals vertically.
What type of jointing method is used with this bracket?
The bracket uses a secure solvent weld jointing method.
Is this bracket suitable for all types of pipes?
No, it is specifically designed for ABS OsmaWeld pipes.
Can I use this bracket outdoors?
While the bracket is durable, its performance outdoors can vary depending on exposure. It is designed primarily for indoor use.
Troubleshooting
The pipe does not fit into the bracket.
Ensure you have the correct bracket size (40mm) for your pipe. Also, make sure that the pipe end is clean and free of any obstructions.
The solvent weld joint is leaking.
Check if enough solvent weld was used. If not, reapply and ensure a tight seal. Make sure to hold the pipe in place while the weld sets.
The bracket is loose after installation.
Verify that the bracket is firmly fixed to the wall or surface and is compatible with the surface. Consider using appropriate fasteners if needed.
Pros and Cons
Pros
- Durable ABS construction ensures a long lifespan.
- Specifically designed for OsmaWeld pipes, ensuring compatibility and a secure fit.
- Provides essential support at recommended intervals, preventing pipe damage.
- Suitable for high-temperature water, broadening its application range.
- Available in white, offering an aesthetic match for many plumbing installations.
Cons
- Requires solvent weld for installation, which can be messy if not handled correctly.
- Specific to 40mm pipe size, limiting its versatility for other sizes.
- Bracket spacing at 1.2m intervals needs to be strictly followed, which could pose limitations in certain installations.
Setup, Compatibility & Care
- Preparation: Ensure the ABS OsmaWeld pipe is clean and free of debris. Measure and mark the installation points for the brackets at 1.2m intervals vertically.
- Bracket Placement: Position the bracket at the marked location.
- Solvent Welding: Apply solvent weld to both the pipe and the bracket's connection point. Insert the pipe into the bracket and hold for a few seconds to allow the solvent to set.
- Inspection: Once the solvent weld is set, inspect the joint to confirm a secure connection.
Compatibility:
The bracket is exclusively compatible with ABS OsmaWeld pipes. It is not designed for use with other pipe materials.
Care:
No specific care is required. Regularly check the brackets for any signs of damage or wear, especially in high-temperature environments.