Best current price£449.10from Best Heating
Shopping.co.uk recommended and popular offers
Best Heating£449.10Visit shop Milano Red Classical Steel Triple Column Horizontal Radiator - 500Mm X 1010Mm - Windsor
Visit shop1 offer from £449.10
View price history by clicking the chart icon.
This guide is for homeowners looking to add a bold, elegant, and efficient heating solution to their living spaces. The Milano Windsor Traditional Column Radiator in Red offers a striking aesthetic combined with excellent heat output, making it a focal point of any room. While its classic design is a significant advantage, potential buyers should note that matching valves and pipe covers are sold separately and must be considered in the overall budget and aesthetic planning.
| Colour | Red |
|---|---|
| Model Part Number | TRUSHH5308FBDRE |
| Brand | Milano |
With a heat output of 3375 BTUs, this radiator is suitable for medium to large rooms. For precise sizing, it's recommended to use a BTU calculator based on your room dimensions, insulation, and window types.
No, this radiator is designed to be compatible with all standard UK central heating systems, including combi, system, and conventional gravity-fed setups.
No, matching radiator valves and pipe covers are sold separately. They are essential for connecting the radiator to your system and for a neat finish.
The Milano Windsor Traditional Column Radiator comes with a 20-year manufacturer's guarantee.
Clean the radiator with a soft, damp cloth. Avoid using abrasive cleaning products or solvents, which can damage the paint finish.
The dimensions are 500mm in height, 1010mm in width, and 100mm in depth.
The pipe centres for this radiator are 1100mm. This measurement is taken from the centre of one pipe connection to the centre of the other. Ensure your existing pipework can be adapted to this configuration or plan accordingly during installation.
The radiator may need bleeding. Locate the bleed valve at the top of the radiator, place a cloth underneath, and gently turn the valve with a radiator key until water starts to drip out. Tighten the valve and check the system pressure.
Check if the central heating system is on and if the thermostat is set to a desired temperature. Ensure the radiator valves are fully open. If the issue persists, check the system pressure and consult a heating engineer.
Ensure the radiator valves are tightened correctly. If leaking persists, the PTFE tape or sealant used during installation may need to be replaced. This usually requires draining the radiator and re-sealing the connections. Professional assistance is recommended.
This could indicate low system pressure or a blockage. Check your central heating system's pressure gauge. If the pressure is adequate, there might be an issue with the system or the radiator's internal workings. Contact a qualified heating engineer.
Compatibility:
This radiator is designed to work with all standard UK central heating systems. This includes:
Installation:
Installation should be carried out by a qualified heating engineer to ensure proper connection to your central heating system and safe mounting. The radiator includes wall fixings and brackets. Ensure the wall is structurally sound to support the weight of the radiator when filled with water.
Included Components:
Components Sold Separately:
Care and Maintenance:
To maintain the pristine finish of your radiator, clean it periodically with a soft, damp cloth. Avoid using abrasive cleaners or harsh chemicals, as these can damage the powder-coated surface. For routine system maintenance, bleed the radiator annually or if you notice cold spots at the top to ensure optimal performance. Ensure the system is properly flushed before installation.
