Best current price£12.99from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£12.99Visit shop (Matt 100 X 150 Cm + 50 X 150 Cm/ 2 Pcs) Vidaxl Car Film Water Resistant Vehicle Wrap Sticker Sheet Protection Film Red 8720286561416
Visit shop2 offers from £12.99
View price history by clicking the chart icon.
This VidaXL Matt Red Car Film is designed for automotive enthusiasts looking to customize their vehicles with a high-tech, cost-effective aesthetic. It offers a durable, water-resistant finish for both interior and exterior applications, providing a striking alternative to traditional paint jobs. A key benefit is its bubble-free application thanks to air channels. However, users should note that proper heating is recommended for optimal stretching and application on complex curves.
| Colour | Red |
|---|---|
| Model Part Number | 210709 |
| Brand | VidaXL |
This film is designed for smooth surfaces. Application on textured surfaces may result in poor adhesion and an uneven appearance.
Use a soft, damp cloth with mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the matt finish.
Carefully use a hairdryer or heat gun to gently warm the film. This makes it more pliable and stretchy, allowing it to conform smoothly around rounded edges. Apply steady pressure with a squeegee as you work.
Yes, the film acts as a protective layer against minor scratches and UV rays. However, it is not designed for heavy-duty protection against significant impacts.
When applied correctly and cared for properly, the durable PVC material can provide years of dependable use.
While possible, layering is generally not recommended as it can create visible seams and affect adhesion. It's best to use single pieces where possible, especially with the provided sizes.
The film itself is self-adhesive. Tools such as a squeegee and a sharp blade are recommended for application but are not included with the product.
If minor bubbles persist, try gently lifting the edge of the film near the bubble and reapply, ensuring to smooth out the air. For stubborn bubbles, a pinhole may be carefully pricked to release air, followed by smoothing.
Apply gentle, consistent heat with a hairdryer or heat gun. Do not overheat. Stretch slowly and carefully, allowing the film to conform to the shape. Ensure you are not stretching it too thin, which can lead to tearing.
Ensure the surface is thoroughly cleaned and dried before application. Reapply heat to the adhesive side of the film and press firmly onto the surface. Make sure the surface is smooth and free of dust or debris.
This usually occurs when stretching the film too aggressively or applying too much heat. Lift the torn section, trim the damaged part if necessary, and reapply heat gently before smoothing. For significant tears, you may need to replace the section.
If the film needs to be removed, gentle heat can soften the adhesive, making removal easier and cleaner. Peel slowly at a low angle.
Setup:
Compatibility:
This film is designed for smooth, non-porous surfaces typically found on vehicles, including painted metal, plastic, and glass. It is suitable for both interior and exterior applications.
Care:
