Best current price£26.85from eBay
Shopping.co.uk recommended and popular offers
eBay£26.85Visit shop SAXBY 7W LED PIR Outdoor Half Wall Lantern Motion Security Sensor Black IP44
Visit shop6 offers from £26.85 - £55.00
View price history by clicking the chart icon.
The Saxby Halbury PIR Wall Light is designed for homeowners seeking enhanced outdoor security and ambient lighting with a traditional aesthetic. Its key benefit is the integrated PIR motion sensor that provides an added layer of security and convenience. A potential consideration is its fixed cool white light temperature. This fixture combines a classic lantern silhouette in matte black polycarbonate with energy-efficient integrated LEDs, offering a diffused cool white light and built-in motion detection for entryways, porches, or patios.
| Colour | Black |
|---|---|
| Model Part Number | Halbury PIR 1lt Wall IP44 7W Cool White |
| Brand | Saxby |
The LED module provides a Cool White light with a color temperature of 4000K.
No, the 7W LED module is integrated and not designed for replacement. The fixture is intended to provide illumination for its lifespan.
The PIR sensor has a maximum detection range of 8 meters and a detection angle of 130 degrees.
The timer function is adjustable, allowing you to set the duration the light stays on from 5 seconds to 5 minutes.
Yes, with an IP44 rating, it is protected against water spray and designed for outdoor use in most common weather conditions.
Yes, the Halbury PIR Wall Light is dimmable when used in conjunction with a suitable LED dimmer switch.
The dimensions are 180mm in width, 180mm in height, and 365mm in depth.
Check that the power supply is connected and switched on. Verify the PIR sensor timer is set correctly and the ambient light setting (if applicable) allows for activation. Ensure the sensor lens is clean.
Adjust the sensitivity settings on the PIR sensor if available, or reposition the light to optimize its detection zone. Obstructions or significant temperature changes nearby can affect performance.
Check the timer function is set correctly. If the issue persists, there may be a fault with the PIR sensor or control circuitry, and professional inspection may be required.
Wipe clean with a damp cloth and mild soap. Avoid harsh chemicals. Ensure the fixture is not exposed to prolonged salt spray if located near the coast, as this can accelerate degradation.
Setup: This fixture requires wiring into your home's mains electrical supply and should be installed by a qualified electrician. Ensure the power is switched off at the mains before commencing installation. Mount the base securely to a suitable outdoor wall, following the manufacturer's instructions for cable routing and connections.
Compatibility: The light module is an integrated 7W LED and is not replaceable. The fixture is dimmable when used with a compatible LED dimmer switch.
Care: To maintain its appearance and performance, clean the exterior with a soft, damp cloth. Avoid using abrasive cleaners or solvents, as these can damage the polycarbonate finish. Regularly check the PIR sensor lens for any dirt or obstructions that might affect its performance.
