Priory Belt Punch - 13mm - No.14
Best current price£12.22from The Range
Best offers
Shopping.co.uk recommended and popular offers
The Range£12.22Visit shop Priory No.14 Belt Punch 13Mm (1/12In) - Grey
Visit shopThe Range£12.22Visit shop All Offers
3 offers from £12.22 - £13.98
View price history by clicking the chart icon.
Product Information
Full details
The Priory No.14 Belt Punch is an essential tool for leatherworkers, hobbyists, and DIY enthusiasts who require precision-cut holes in soft materials. Designed for professional-grade accuracy, this 13mm hollow punch excels at creating clean, consistent holes in leather belts and straps; however, it is strictly intended for use on soft substrates and will dull rapidly if used against hard surfaces or materials exceeding its design capacity.
All features
| Model Part Number | No.14 |
|---|---|
| Brand | Priory |
Extended Product Information
FAQs
Can this punch be used on materials other than leather?
Yes, it is effective on soft, non-abrasive materials such as rubber, heavy gasket paper, or felt, provided they are thin enough to be accommodated by the punch's barrel depth.
Do I need to sharpen the punch before the first use?
The Priory No.14 comes factory-ground and ready for immediate use. Sharpening should only be performed once you notice a decrease in cutting efficiency.
What is the best surface to punch on?
Use a dedicated poly-cutting board or a wooden block. Avoid metal or concrete, which will destroy the sharp edge instantly.
Can I use a metal hammer with this tool?
A rubber or raw-hide mallet is highly recommended to protect the tool's head and ensure a consistent strike.
How do I clear the waste material from the punch?
The punch features a milled clearway designed to pass the waste upward; if it does not clear automatically, use a small rod to push the plug out through the top.
Troubleshooting
Punch leaving jagged or incomplete holes
Ensure the material is placed on a firm, flat, sacrificial surface and verify that the cutting edge is free of debris.
Material getting stuck inside the punch
The clearway is likely packed; use a small dowel or punch-clearing tool to push out the waste leather plug from the top of the barrel.
Tool feels dull after minimal use
You may be striking against a surface that is too hard; switch to a leather-crafting poly board or high-density rubber mat.
Pros and Cons
Pros
- Clean, burr-free hole edges
- Effective waste material ejection system
- Robust construction for long-term reliability
- Consistent performance across various soft leathers
Cons
- Requires a suitable sacrificial surface to prevent dulling
- Specific 13mm size is not adjustable
- Heavy-duty mallet required for optimal results
Setup, Compatibility & Care
To maintain the edge of your No.14 punch, never strike it against stone, metal, or glass. Always store the tool in a dry, low-humidity environment to prevent surface oxidation. If the cutting edge begins to lose its bite, use a fine-grit slip stone to gently hone the exterior bevel, being careful not to alter the internal taper. When not in use, a light coating of machine oil is recommended to protect the steel finish.