Best current price£20.57from eBay
Shopping.co.uk recommended and popular offers
eBay£20.57Visit shop Stabilizer Link Rear Axle Left Coupling Rod ADH28533 BLUE PRINT for HONDA
Visit shop6 offers from £20.57 - £28.43
View price history by clicking the chart icon.
This Blue Print Anti Roll Bar Link (ADH28533) is designed for HONDA PRELUDE 2.2 models (1996-2001) to enhance rear suspension stability. Its key benefit is improved handling and reduced body roll during cornering, providing a more connected driving experience. A caveat is the need for professional installation by a competent individual, as fitting instructions are typically not supplied.
| Colour | Blue |
|---|---|
| Model Part Number | ADH28533 |
| Brand | Blue Print |
An Anti Roll Bar Link, also known as a stabiliser link or drop link, connects the anti-roll bar (stabiliser bar) to the suspension control arm or strut. It helps control body roll during cornering.
This specific Blue Print part (ADH28533) is designed for HONDA PRELUDE 2.2 models manufactured between 1996 and 2001, for the rear axle.
These products are usually supplied without fitting instructions. It is recommended that installation is carried out by a competent individual or a qualified mechanic.
Key specifications include a length of 165 mm, spanner size of 19, thread length of 27 mm, pipe diameter of 8 mm, and an external thread size of M12 x 1.5.
This specific part (ADH28533) is designed for the rear axle, fitting on either the left or right side.
The product is made of steel, ensuring durability and resistance to wear and tear.
A worn or loose anti-roll bar link can cause noise. Inspect the link for play, damage, or loose fittings. Ensure it is securely tightened to the correct torque.
This indicates the anti-roll bar system may not be functioning optimally. Check if the anti-roll bar link is damaged, worn, or if the bushings are compromised. Replacement of the link may be necessary.
While not always directly caused by the link, a faulty anti-roll bar link can affect wheel alignment over time, contributing to uneven tire wear. Ensure the link is in good condition and correctly installed.
Compatibility: This part (ADH28533) is specifically designed for the HONDA PRELUDE 2.2, covering model years from 1996 to 2001. It is intended for the rear axle, fitting either the left or right side. Always use a vehicle make model tool or consult a professional to confirm fitment for your specific vehicle before purchase.
Setup/Installation: Installation should be performed by a competent individual or a qualified mechanic. These parts are typically supplied without fitting instructions. Proper torque specifications must be used when tightening the nuts to ensure secure attachment and prevent damage.
Care: As a steel component subjected to road conditions, regular inspection for rust, damage, or wear is recommended. Clean off any accumulated dirt or debris to prevent premature corrosion. Ensure that adjacent suspension components are also in good condition to maintain overall system integrity.
