LPD Doors Utah 3L Primed White Door - White

Primed White panels frames three parallel clear glazed panels in this modern door design. Features...

Best current price£150.00from B&Q

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

B&Q£150.00Visit shop

B&Q - Utah Clear Glazed Modern White Internal Chipboard Door(H)1981mm (W)762mm (T)35mm

Visit shop

All Offers

3 offers from £150.00

View price history by clicking the chart icon.

B&QB&Q - Utah Clear Glazed Modern White Internal Chipboard Door(H)1981mm (W)762mm (T)35mm

Free delivery in 1–3 days

£150.00

Visit shop

Product Information

Full details

The LPD Utah 3L Primed White Door is designed for homeowners looking to enhance their interior spaces with a modern, elegant, and functional door. Its key benefit is the combination of a stylish primed white finish and three clear glazed panels that allow natural light to flow, creating a brighter atmosphere. A potential consideration is that the door requires self-assembly and finishing, such as painting, to match your decor.

All features

Colour	White
Model Part Number	WFUTAH30
Brand	LPD

Extended Product Information

FAQs

What type of paint should I use for finishing?

You can use most types of interior paint, such as acrylic, oil-based, or water-based paints. Ensure you use a good quality primer first, followed by at least two top coats for a durable and attractive finish.

Can I hang this door with the hinges on either side?

Yes, the door is not pre-handed and can be hung to open from either the left or right side, depending on your needs. Ensure hinges and the lock are mortised accordingly.

What are the exact dimensions of the glazed panels?

The product information does not specify the exact dimensions of individual glazed panels, only that there are three parallel clear glazed panels within the door design.

How much can I trim from the door?

You can trim up to 8mm from the long edge and 8mm from the short edge of the door. Always ensure to seal cut edges thoroughly after trimming.

What is the warranty period for this door?

The LPD Utah 3L Primed White Door comes with a 10-year conditional warranty against manufacturing defects.

Is this door suitable for bathrooms or kitchens?

While the solid core offers some moisture resistance, it is generally recommended for areas with moderate humidity. Ensure proper finishing and ventilation, especially in kitchens and bathrooms, and consider doors specifically rated for high-moisture environments if needed.

Troubleshooting

Door is difficult to close or sticks.

Check for obstructions, ensure the frame is square, and verify hinges are properly installed and aligned. Minor adjustments to hinges or door edges may be required.

Paint finish is uneven.

Ensure surfaces were properly prepared and primed. Apply thin, even coats of paint, allowing adequate drying time between coats. Sand lightly between coats if necessary.

Glazed panels rattle.

Check that beading around the glass is secure. If loose, re-apply beading with a suitable adhesive or wood filler, ensuring not to overtighten and crack the glass.

Door doesn't close flush.

Verify the door is hung correctly and the frame is plumb. Check the latch mechanism and strike plate alignment. Minor adjustments to the strike plate position might be needed.

Pros and Cons

Pros

Enhances natural light and openness with clear glazed panels.
Solid core provides good insulation and sound dampening.
Primed finish allows for easy customization to match decor.
Modern design complements contemporary interiors.
Durable construction for long-lasting use.

Cons

Requires self-assembly and painting.
Glass panels may require careful handling during installation.
Primed finish needs an additional top coat for full protection and aesthetic.
Internal door only, not suitable for exterior use.
Standard dimensions may require trimming for some openings.

Setup, Compatibility & Care Instructions

Setup:

Preparation: Ensure the door frame is square and plumb. Check that the door's dimensions are suitable for the opening, accounting for the trimming allowance.
Trimming: If necessary, trim the door edges using a sharp saw. Remember the 8mm allowance on each edge.
Hinge & Lock Installation: Mortise for hinges and lock mechanisms according to standard joinery practices.
Hanging: Hang the door using appropriate hardware. Adjust if needed for smooth operation.
Finishing: Apply a high-quality primer followed by your chosen top coat of paint. Ensure all surfaces, including cut edges, are fully sealed.

Compatibility:

This is an internal door and should not be used for exterior applications.
It is designed for standard door frames.
Ensure compatibility with your chosen hardware (hinges, handles, locks).

Care:

Clean with a soft, damp cloth. Avoid abrasive cleaners or excessive moisture.
Periodically check that hinges and hardware are secure and functioning correctly.
Touch up paintwork as needed to maintain the finish.