Best current price£9.37from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£9.37Visit shop Timco 80Tct Angle Grinder Cup Brush - Twisted Knot Steel Wire 80Mm Blister Pack 1
Visit shop
B&Q£15.73Visit shop B&Q - Angle Grinder Cup Brush Twisted Knot Steel Wire80mm
Visit shop3 offers from £9.37 - £16.50
View price history by clicking the chart icon.
The Timco 80mm Angle Grinder Cup Brush is designed for professional tradespeople and serious DIY enthusiasts who require a heavy-duty solution for aggressive surface preparation. Its primary benefit lies in its high-density twist wire construction, which excels at stripping paint, rust, and stubborn debris from metal and masonry, though users should note that the aggressive nature of the wire can leave deep gouges on softer materials if not handled with precision.
| Model Part Number | PTDTIM80TCT |
|---|---|
| Brand | Timco |
This brush is rated for a maximum speed of 8,500 RPM.
Yes, it can be used on wood to strip paint or for distressing, but be careful as the aggressive wires can quickly gouge the grain.
Once the outer wires wear down, you can remove the metal tension ring to expose more wire and continue working.
Always wear impact-resistant safety glasses, a face shield, heavy gloves, and long sleeves as wires can occasionally snap during operation.
It is designed to fit standard angle grinders with the industry-standard thread pattern.
Check that the brush is centered on the spindle and that wire bundles are not bent or broken unevenly.
Ensure you are not exceeding the 8,500 RPM rating of the brush and avoid applying excessive pressure.
Remove the metal ring to expose more wire length, providing a fresh cutting edge.
To install, ensure your angle grinder is disconnected from the power source. Thread the brush onto the spindle until secure; ensure the locking nut or flange is tight to prevent slippage. When the wire performance drops due to wear, remove the metal tension ring using pliers to allow for more flex and reach. To maintain the tool, keep it free from moisture to prevent premature rust. After each use, inspect the wire bundles for signs of fatigue. If the brush begins to vibrate excessively, it is likely unbalanced due to uneven wire wear and should be discarded.
