Dremel SC407 EZ SpeedClic Sanding Mandrel with Sanding Bands - Pk 3

This set is ideal for sanding and shaping a variety of materials including wood, plastic, fiberglass, and soft metals. The effectiveness can vary with the grit of the sanding band used.

You should change the sanding band when it appears dull, no longer removes material effectively, starts to tear, or shows significant signs of wear. A fresh band ensures optimal performance and prevents damage to your project.

Yes, it is designed for use with most Dremel rotary tools, provided they accept a 3.2mm shank diameter, which is a standard size for Dremel accessories.

Yes, Dremel offers replacement sanding bands specifically designed for the EZ SpeedClic mandrels. Look for sanding bands compatible with the SC407 or other EZ SpeedClic sanding accessories.

The EZ SpeedClic system's primary advantage is its tool-free, rapid accessory change mechanism. This allows you to quickly swap out sanding bands or other EZ SpeedClic accessories, saving significant time and effort during your projects.

The shank diameter is 3.2mm, the working diameter of the sanding bands is 13mm, and the overall length of the mandrel is 36mm.

Ensure the EZ SpeedClic mechanism is fully engaged and clicked into place. Verify that the sanding band is the correct size for the 13mm working diameter mandrel. Avoid excessive side pressure during operation.

Reduce the pressure applied during sanding. Ensure the rotary tool's speed setting is appropriate for the material being sanded (lower speeds for softer materials, higher for harder). Replace worn bands promptly to maintain efficiency.

Replace the sanding band if it's dull or clogged with material. Clean any debris from the workpiece. Adjust the tool speed; using too high a speed for certain materials can cause burning. Keep the tool moving across the surface.

Verify your rotary tool's collet size. The SC407 requires a 3.2mm collet. Ensure the collet nut is tightened firmly after inserting the mandrel. If using a different collet, ensure it matches the 3.2mm shank diameter.