EA501 PIR Motion Sensor Alarm - Sterling - White

The PIR motion sensor can detect movement up to 7 meters (approximately 23 feet) away.

The infrared remote controls can arm and disarm the alarm from up to 5 meters (approximately 16 feet) away.

Yes, the alarm unit requires batteries for operation. These are not included with the product.

The alarm will sound upon detecting motion and then automatically reset itself after 30 seconds.

This alarm is designed for indoor use. Exposure to weather conditions may damage the unit and affect its performance.

The alarm automatically resets after 30 seconds. You can also manually disarm it using the remote control.

The EA501 alarm operates with the included remotes. If a remote is lost, you will need to rely on the remaining one for operation. Replacement remotes may be available from the manufacturer.

Ensure batteries are correctly installed and have sufficient power. Check that the unit is armed using the remote. Verify that the motion is within the 7-meter detection range and not obstructed.

Check the battery in the remote control and replace if necessary. Ensure you are within the 5-meter operating range of the alarm unit. Try re-arming/disarming to see if the signal is received.

Ensure the sensor is not pointed directly at heat sources (like vents or windows with direct sunlight) or areas with significant air currents. Reposition the unit if necessary. Consider the potential for pets or insects triggering the sensor.

The alarm should auto-reset after 30 seconds. If it does not, try removing and reinserting the batteries to perform a hard reset. If the issue persists, contact the manufacturer.