EnerGenie Extension Lead - 4-Socket Extension Lead - 1.8 m - ENER010
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for users of the EnerGenie ENER010 4-Socket Extension Lead. It provides a comprehensive overview of the product's features and how to use them effectively. The key benefit is the convenience of controlling appliances remotely. A key consideration is the 3kW power limit, which users must be mindful of. This extension lead allows you to control up to four devices individually or simultaneously via a remote control.
All features
| Model Part Number | ENER010 |
|---|---|
| Brand | EnerGenie |
Extended Product Information
FAQs
What is the range of the remote control?
The remote control has a range of up to 30 meters, operating through walls and ceilings.
What is the maximum power the extension lead can handle?
The maximum power is 3kW, and the maximum current is 13A.
Can I control each socket individually?
Yes, each of the four sockets can be controlled independently via the remote control.
Is surge protection included?
Yes, the EnerGenie ENER010 features surge protection to safeguard connected devices.
Is the extension lead suitable for outdoor use?
No, the EnerGenie ENER010 is designed for indoor use only.
How do I replace the remote control batteries?
The remote control uses batteries. Open the battery compartment on the back of the remote and replace the batteries with the correct type.
What is the length of the power cable?
The power cable is 1.8 meters long.
What is the warranty period?
Warranty information is not available in the provided product data. Please refer to the product packaging or retailer for warranty details.
Troubleshooting
Remote control not working.
Check the batteries in the remote control and replace them if necessary. Ensure the extension lead is plugged in and powered on. Make sure there are no obstructions between the remote and the receiver.
Sockets not responding to the remote control.
Ensure the devices plugged into the extension lead are switched on. Check if the extension lead is within range of the remote control (up to 30 meters). Reprogram the remote if necessary by following the pairing instructions in the manual.
Extension lead not powering on.
Check the wall outlet to ensure it is working correctly. Ensure that the devices connected to the extension lead do not exceed the 3kW power limit.
Pros and Cons
Pros
- Remote control functionality provides convenience and accessibility.
- Individual socket control allows for efficient energy management.
- Surge protection safeguards connected electronics.
- The 1.8m cable offers flexibility in placement.
- Easy to set up and use.
- Eliminates the need to manually switch off appliances.
Cons
- Requires line of sight (or near line of sight) between the remote and the base unit.
- Limited to a 3kW power capacity, which may not be suitable for all appliances.
- Batteries in the remote need to be replaced periodically.
- May not be suitable for outdoor use.
- The remote control unit may be easily misplaced.
Setup, Compatibility & Care
- Setup:
- Plug the EnerGenie ENER010 into a standard wall outlet.
- Plug your appliances into the extension lead's sockets.
- Pair the remote control with the extension lead (if necessary; some models come pre-paired). Refer to the product manual for pairing instructions if needed. Usually, this involves pressing a button on the extension lead and the remote simultaneously.
- Compatibility:
- The EnerGenie ENER010 is compatible with any domestic appliances rated up to 13A.
- Ensure the total power draw of all connected devices does not exceed 3kW.
- Suitable for indoor use only.
- Care:
- Unplug the extension lead from the wall before cleaning.
- Use a dry or slightly damp cloth to wipe the unit. Do not use liquid cleaners.
- Keep the unit away from water and excessive moisture.
- Do not disassemble or attempt to repair the unit yourself.