Home.smart Black Flange Standard Aluminium Pop Rivets, 3.2 X 10Mm Dome Headed - 50 Pack
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for DIY enthusiasts, fabricators, and anyone needing a reliable fastening solution for sheet metal, plastics, rubbers, and laminates. The Home.smart Black Flange Standard Aluminium Pop Rivets offer strong, vibration-resistant joints with a discreet dome head finish. A key consideration is their specific size (3.2 x 10mm), requiring a compatible rivet gun and ensuring suitability for the intended application.
All features
| Colour | Black |
|---|---|
| Brand | Home.smart |
Extended Product Information
FAQs
What is the primary advantage of large flange rivets?
Large flange rivets distribute the load over a wider area, which is particularly beneficial when joining softer materials like plastic or when the material has pre-drilled oversized holes, helping to prevent pull-through.
Are these rivets suitable for outdoor use?
The rivets are made of aluminium with a steel mandrel. While aluminium offers good corrosion resistance, the steel mandrel can be susceptible to rust over time, especially in harsh outdoor or marine environments. For maximum longevity in exposed conditions, consider stainless steel rivets.
Can I use these rivets with any pop rivet gun?
No, you must use a pop rivet gun that is compatible with 3.2mm diameter rivets. Most standard rivet guns accommodate a range of sizes, but always check your tool's specifications.
What does 'dome headed' mean?
A dome head is a slightly rounded, low-profile head shape that provides a neat appearance and is standard for most pop rivets.
How do I know if 3.2mm x 10mm is the right size?
The 3.2mm refers to the diameter of the rivet body and mandrel, determining the required hole size. The 10mm refers to the grip range – the maximum combined thickness of the materials the rivet can securely join. Ensure your material thickness falls within this range.
Can these rivets be removed easily?
Pop rivets create a permanent joint. Removal typically involves drilling out the rivet body.
What is the material of the rivet body and mandrel?
The rivet body is made of aluminium, and the central mandrel is made of steel.
Troubleshooting
Rivet gun not snapping mandrel
Ensure the rivet gun is properly seated on the rivet head and that the gun's jaws are clean and functioning correctly. Check if the rivet gun is rated for 3.2mm rivets.
Rivet not pulling materials together tightly
Verify that the drilled holes are the correct size (3.3-3.4mm). Ensure the materials are held firmly together before setting the rivet. Check for debris in the hole.
Mandrel breaks prematurely or too late
This may indicate an issue with the rivet gun's pressure or adjustment. Consult your rivet gun's manual. Ensure you are using rivets of the correct size and type for your tool.
Joint feels loose or vibrates excessively
Ensure a sufficient number of rivets are used for the application. Check that the materials are not too thin or flexible for the rivet's holding power. Verify the rivet was set correctly.
Pros and Cons
Pros
- Provides strong and secure fastenings.
- Excellent resistance to vibrations.
- Large flange offers good load distribution.
- Discreet black dome head finish.
- Suitable for a wide range of materials including sheet metal, plastics, and rubbers.
Cons
- Specific size (3.2 x 10mm) may not suit all applications.
- Requires a compatible pop rivet gun for installation.
- Aluminium construction may be less suitable for extremely high-stress or corrosive environments compared to steel.
Setup, Compatibility & Care
Setup:
- Ensure you have a compatible pop rivet gun (riveter).
- Select the correct drill bit size for the hole to be drilled, typically matching the rivet's mandrel diameter (3.2mm in this case).
- Drill the required holes through the materials you wish to join.
- Insert the rivet mandrel into the nosepiece of your rivet gun.
- Place the rivet body into the drilled holes, ensuring the materials are flush.
- Squeeze the trigger of the rivet gun repeatedly until the mandrel snaps off, securing the joint.
Compatibility:
- Materials: Ideal for sheet metal, plastics, rubbers, and laminates.
- Rivet Gun: Requires a pop rivet gun designed for 3.2mm rivets.
- Hole Size: Recommended hole diameter is approximately 3.3mm to 3.4mm.
Care:
- Store in a dry environment to prevent corrosion of the steel mandrel.
- Clean with a dry cloth if dust accumulates.