Shower Hose - 1.5m

The hose has an 8mm internal bore.

This hose has a standard G1/2 inch (13mm) connection, which is compatible with most British shower heads. It is recommended to check your existing shower head's connection size if you are unsure.

The hose is designed for standard domestic water pressure. While it can withstand typical pressures, extremely high-pressure systems might require specialized hoses.

Clean the hose with a soft, damp cloth. Mild soap can be used if necessary, followed by rinsing and drying. Avoid harsh chemicals or abrasive materials.

The hose is crafted from a robust five-layer flexible silver PVC material.

The hose is designed to be flexible and tangle-free, which helps minimize kinking during normal use.

Ensure the conical connector is properly seated and hand-tighten further. If leaking persists, check the washer inside the connector and ensure it is present and undamaged. Avoid overtightening with tools.

Check the hose for any kinks or internal blockages. Ensure the G1/2 inch connections are not obstructed. If the issue persists, the shower head itself might be the source of restriction.

Ensure the hose is not kinked. For initial stiffness, running warm water through it for a few minutes can help soften the PVC. Avoid exposing the hose to extreme heat sources.