Best current price£1.26from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£1.26Visit shop Draper 37792 Silicon Carbide Abrasive Strips 38Mm X 225Mm 180 Grit (Pack Of 10) Each 10
Visit shop
B&Q£5.47Visit shop B&Q - Silicon Carbide Abrasive Strips38mm X 225mm180 Grit (Pack Of 10) 37792
Visit shop11 offers from £1.26 - £20.99
View price history by clicking the chart icon.
This guide is for users of Draper Silicon Carbide Abrasive Strips, designed to enhance sanding efficiency. These strips offer aggressive cutting action and extended lifespan, but note that the mesh design may require different pressure than solid-backed abrasives. This guide covers key features, usage, and maintenance to help you get the most out of your abrasive strips.
| Model Part Number | 37792 |
|---|---|
| Brand | Draper |
The 180G grit is suitable for general sanding, de-burring, and solder removal. For coarser work, consider a lower grit (e.g., 80G or 120G), and for finer finishes, use a higher grit (e.g., 220G or higher).
Yes, these silicon carbide strips are designed for both wet and dry sanding. Wet sanding can help reduce clogging and improve the finish.
Rinse the strips with water to remove debris. You can also use a mild detergent if needed. Allow them to air dry completely before storing.
These strips can be used on a wide range of materials, including metal, wood, and plastics.
These strips can last up to 4x longer than conventional sanding strips, depending on usage and the material being sanded.
Yes, the abrasive strips can be easily cut to the required size using scissors or a utility knife.
Reduce pressure, use a coarser grit for initial removal, or switch to a wet sanding technique.
Ensure you are using the correct grit for the material. Check that the strip is properly secured and apply firm, even pressure. Replace with a new strip if worn.
