Best current price£64.96from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£64.96Visit shop Sealey Red Low Profile Short Chassis Trolley Jack 2 Tonne
Visit shop
B&Q£92.71Visit shop B&Q - Low Profile Short Chassis Trolley Jack 2 TonneRed
Visit shop7 offers from £64.96 - £92.71
View price history by clicking the chart icon.
The Sealey 1020LE Trolley Jack is designed for vehicle owners and mechanics needing to lift low-profile vehicles like sports cars or custom builds. Its primary benefit is its ultra-low entry height, allowing access where standard jacks cannot reach, though its short chassis may require precise positioning on larger vehicles. This 2-tonne capacity jack features a robust construction with a heavy-duty chassis and a one-piece hydraulic unit for reliable lifting.
| Model Part Number | 1020LE |
|---|---|
| Brand | Sealey |
The Sealey 1020LE has a low entry height of just 85mm.
The maximum lifting capacity of this trolley jack is 2 tonnes (2000kg).
This jack is rated for 2 tonnes and its low-profile design is optimized for sports cars and lower vehicles. It may not be suitable for heavier SUVs or trucks which often exceed this weight capacity.
Yes, a Type A rubber jack pad is included to protect the vehicle's jacking points.
It is recommended to check the hydraulic oil level periodically, especially if you notice a decrease in performance. Refer to the product manual for specific intervals and procedures.
For safety and optimal performance, this jack should always be used on a level, hard, and stable surface.
The chassis length of this model is 563mm.
Ensure the release valve is fully closed. Check the hydraulic oil level and top up if low. Inspect for any air in the hydraulic system and bleed if necessary according to the manufacturer's instructions.
Verify that the jack is on a level, hard surface. Check the hydraulic oil level. Ensure the load is within the 2-tonne capacity. Inspect the ram and seals for leaks.
This could indicate a leak in the hydraulic system. Check the release valve is fully closed. Inspect seals and connections for any signs of oil leakage and contact customer support if damage is found.
Ensure the handle is correctly inserted into the pump mechanism. Check that the release valve is fully closed, as an open valve will prevent lifting.
Setup: Before first use, ensure the hydraulic unit is properly filled with hydraulic jack oil (refer to manufacturer manual if unsure). Check that the release valve is fully closed before beginning to pump. Position the jack centrally under the vehicle's designated jacking point, ensuring the saddle makes firm contact.
Compatibility: This jack is compatible with vehicles that have a suitable jacking point and do not exceed its 2-tonne (2000kg) lifting capacity. It is particularly suited for low-profile cars and vehicles with minimal ground clearance.
Care: Always store the jack in a clean, dry environment. After each use, lower the saddle fully and wipe down the jack body to remove any dirt or debris. Periodically check the hydraulic oil level and top up if necessary, following manufacturer guidelines. Inspect the jack for any signs of wear or damage before each use.
