Best current price£49.95from Tooled Up
Shopping.co.uk recommended and popular offers
Tooled Up£49.95Visit shop Draper Light Swp130 Submersible Clean Water Pump
Visit shop
B&Q£49.99Visit shop B&Q - 230V 250W Submersible Clean Water Pump With Float Switch130L/min
Visit shop7 offers from £49.95 - £52.75
View price history by clicking the chart icon.
This Draper submersible pump is ideal for homeowners needing to efficiently remove clean water from flooded areas like basements, pools, and hot tubs, or for transferring water for irrigation and garden features. Its key benefit is the automatic float switch that manages operation based on water level, though it's important to note it's designed for debris-free water and can only handle very small particles up to 3mm.
| Model Part Number | 98727 |
|---|---|
| Brand | Draper |
The pump can be safely submerged up to 7 meters deep.
This pump is designed for clean water. It can handle very small particles like gravel and dirt up to 3mm wide, but not larger debris such as leaves or stones.
The float switch rises with the water level. When the water reaches a certain height, it turns the pump motor on. As the water level drops, the float switch lowers and turns the pump off.
The pump has a maximum flow rate of 130 liters per minute.
No, the discharge hose is not included. You will need to provide a suitable hose compatible with the pump's outlet.
This pump comes with the standard Draper 12 months parts and labour warranty.
Store the pump in a dry, frost-free location. It's recommended to clean it with fresh water after each use before storage.
Check that the power cord is securely plugged into a working electrical outlet. Ensure the float switch is not stuck in the 'off' position; try gently moving it. Verify the water level is high enough to activate the float switch.
The intake screen may be clogged. Disconnect power, remove the pump from the water, and clean the intake area and the float switch. Ensure the discharge hose is not kinked or blocked.
Check the discharge hose for blockages or kinks. Ensure the pump is fully submerged and the float switch is positioned correctly to activate the motor. If the water source contains fine silt, it may be drawn into the pump and reduce efficiency; try relocating the pump to a firmer spot.
Setup:
Compatibility:
Care:
