Best current price£19.79from B&Q
Shopping.co.uk recommended and popular offers
B&Q£19.79Visit shop B&Q - Compass Varnish 375Ml High Gloss One Component Polyurethane Wood Varnish
Visit shop3 offers from £19.79 - £41.24
View price history by clicking the chart icon.
International Compass Varnish is designed for DIY enthusiasts and professionals seeking a durable, high-gloss finish for interior and exterior wooden surfaces. Its key benefit lies in its ability to enhance natural wood grain while providing robust protection against scratches and spills. A potential consideration is its light amber tint, which may subtly alter the wood's original color.
| Colour | Brown |
|---|---|
| Brand | International |
This varnish is designed for bare or previously varnished wood. It is not recommended for use over existing paint finishes without thorough preparation and testing.
For most applications, 2-3 coats are recommended for optimal protection and appearance. Follow with additional coats if increased durability is required.
Drying time is typically 2-4 hours, but this can vary based on temperature and humidity. Ensure the surface is dry to the touch and has no tackiness before applying the next coat.
While durable for general woodwork, International Compass Varnish is not specifically formulated for high-traffic floor applications. For floors, consider a product designed for floor use.
Thinning is generally not recommended unless specified by the manufacturer for spray application. If thinning is necessary for spraying, use the appropriate thinner recommended for polyurethane varnishes.
Store in a cool, dry place away from direct sunlight and sources of ignition. Ensure the lid is tightly sealed to prevent skinning and evaporation.
Coverage varies depending on the application method and wood porosity, but typically ranges from 10-12 square meters per liter per coat.
Ensure the application area has adequate ventilation and is within the recommended temperature range (typically 10-25°C). Avoid applying in very humid conditions. Check that the varnish has not expired.
Apply thinner coats and use a high-quality brush. Maintain a wet edge and avoid overworking the varnish. Ensure the varnish is flowing smoothly; if not, consider a slightly thinner coat or adjust application technique.
Ensure the surface was properly prepared and free of dust or contaminants. Stir the varnish thoroughly before and during application. Apply evenly, maintaining consistent coverage.
This usually indicates poor adhesion. Ensure the surface was clean and properly prepared before application. Remove the failed coating, prepare the surface again, and reapply.
Preparation: Ensure the wooden surface is clean, dry, and free from dust, grease, and old finishes. Lightly sand the surface with fine-grit sandpaper and wipe away dust. For oily timbers, a solvent wipe may be necessary.
Application: Stir the varnish thoroughly before use. Apply thin, even coats using a good quality brush, roller, or spray gun. Avoid over-application. Allow adequate drying time between coats, typically 2-4 hours depending on conditions.
Compatibility: Suitable for most wood types, including oak, pine, mahogany, and oily timbers. Test on an inconspicuous area first if unsure. Do not apply over existing wax or oil finishes without proper preparation.
Care: Clean spills immediately with a damp cloth. For routine cleaning, use a soft, damp cloth. Avoid abrasive cleaners or solvents, as they can damage the finish.
