Wessex Electrical Wessex Matt 13A DP Socket 2 Gang in Black
Best current price£10.99from B&Q
Best offers
Shopping.co.uk recommended and popular offers
B&Q£10.99Visit shop B&Q - Windsor 2G 13Amp Socket Matt Black
Visit shopB&Q£10.99Visit shop One Offer
1 offer from £10.99
View price history by clicking the chart icon.
Product Information
Full details
This 2-gang 13A DP socket in matt black from Wessex Electrical is for homeowners and designers seeking a modern, stylish power outlet. Its key benefit is a unique raised, rounded profile with black inserts and switches for a distinctive aesthetic. A potential caveat is the 25mm minimum back box depth requirement, which may necessitate wall adjustments during installation.
All features
| Model Part Number | Windsor 2G 13Amp Socket Matt Black |
|---|---|
| Brand | B&Q |
Extended Product Information
FAQs
What is the main advantage of a Double Pole (DP) socket?
A Double Pole socket switches both the live and neutral wires simultaneously, providing a complete disconnection from the power supply for enhanced safety compared to single-pole switches.
Do I need a special back box for this socket?
Yes, this socket requires a back box with a minimum depth of 25mm to accommodate the unit and its wiring.
How should I clean the matt black finish?
Clean with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish. For tougher marks, use a mild soap solution and dry thoroughly.
Can this socket be used outdoors?
The attached gasket offers some protection, but this socket is primarily designed for indoor use. For outdoor applications, specific outdoor-rated sockets should be used.
What type of screws are included?
The socket comes with matching screws for a cohesive appearance.
Is this socket dimmable?
This is a standard 13A DP socket for power outlets, not a dimmer switch. It is not designed for dimming lights.
What is the warranty period for this product?
Please refer to the manufacturer's warranty information provided with the product or on the B&Q website for specific warranty details.
Troubleshooting
Socket not providing power
Check that the circuit breaker or fuse is engaged. Verify wiring connections to the socket terminals. Ensure the DP switch is in the 'on' position.
Switch feels stiff or loose
Ensure the socket is correctly mounted and screws are not overtightened. If the issue persists, contact a qualified electrician.
Matt finish appears marked
Gently clean with a slightly damp, soft cloth. For stubborn marks, use a mild soap solution and rinse with a clean damp cloth, then dry thoroughly. Avoid harsh chemicals.
Gasket appears damaged or misplaced
If the gasket is damaged, it may need replacement to maintain protection. Ensure it is correctly seated during installation.
Pros and Cons
Pros
- Stylish and modern aesthetic with a matt black finish.
- Unique raised, rounded profile for a distinctive look.
- Integrated gasket for added protection.
- Double Pole switching for increased electrical safety.
- Cohesive design with black inserts, switches, and matching screws.
Cons
- Requires a minimum back box depth of 25mm, which might be deeper than existing installations.
- The raised profile may be more susceptible to dust accumulation than flush designs.
- Matt finish can sometimes show fingerprints more readily than gloss finishes.
- Installation may require specific considerations due to the gasket and profile.
- Only available in a 2-gang configuration.
Setup, Compatibility & Care
Setup:
- Safety First: Ensure the power supply to the circuit is turned off at the main consumer unit before commencing installation.
- Back Box: Use a suitable back box with a minimum depth of 25mm. If replacing an existing socket, ensure the current back box meets this depth requirement or is replaced.
- Wiring: Connect the wires according to standard electrical practices for a 13A DP socket, paying attention to the L (Live), N (Neutral), and E (Earth) terminals. The DP function means both live and neutral should be switched.
- Gasket: Ensure the attached gasket is correctly positioned against the wall surface to provide its intended protection.
- Fitting: Secure the socket to the back box using the provided matching screws. Avoid overtightening.
- Testing: Once installation is complete, restore power and test the socket functionality.
Compatibility:
- Compatible with standard UK electrical wiring systems.
- Requires a minimum 25mm deep wall box.
- Suitable for circuits protected by appropriate fuses or circuit breakers.
Care:
- Clean the surface with a soft, damp cloth. Avoid abrasive cleaners or solvents, as these can damage the matt finish.
- Periodically check that screws remain tight and the unit is securely fitted.
- Ensure ventilation around the socket is not obstructed.