JCB LED Light Bulb - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This JCB LED A60 light bulb is designed for homeowners looking to replace traditional 60W incandescent bulbs with an energy-efficient and long-lasting alternative. Its key benefit is significant energy savings and an extended lifespan, reducing replacement frequency and electricity costs. A potential caveat is its cool white light, which may not be suitable for all ambient lighting preferences. This bulb offers an 806lm output with a 6500K color temperature and features a standard B22 cap for easy installation.
All features
| Colour | White |
|---|---|
| Model Part Number | UTST367 |
| Brand | JCB |
Extended Product Information
FAQs
What is the color temperature of this bulb?
This bulb has a color temperature of 6500K, which is considered cool white light.
What is the lumen output?
The bulb provides an 806 lumen light output, comparable to a traditional 60W incandescent bulb.
What type of cap does this bulb have?
It has a standard B22 (Bayonet Cap) fitting.
How long does this LED bulb typically last?
This energy-efficient bulb is rated to last up to 10 years under normal usage conditions.
Can I use this bulb outdoors?
This bulb is designed for indoor use. Outdoor use may void the warranty and could lead to premature failure due to environmental factors.
Is this bulb dimmable?
The product description does not specify dimmability. Standard LED bulbs are often not dimmable unless explicitly stated. Using it with a dimmer switch may cause flickering or damage.
What are the dimensions of the bulb?
The approximate dimensions are 12cm in height and 6cm in diameter.
Troubleshooting
Bulb does not turn on.
Ensure the power switch is on. Check that the bulb is securely screwed/locked into the B22 socket. Try the bulb in another known working fixture to rule out fixture issues. Verify the fixture is receiving power.
Flickering light.
Check for a loose connection in the socket. Ensure the bulb is fully seated. If the flickering persists, there might be an incompatibility with the fixture or dimmer switch (if applicable and not designed for LED). Contact customer support if the issue continues.
Reduced brightness.
Ensure the bulb is clean. Check that the fixture is not causing overheating, which can sometimes affect LED performance. If the bulb is new and performing poorly, it may be defective.
Pros and Cons
Pros
- Significant energy savings compared to traditional bulbs.
- Extended lifespan reduces maintenance and replacement costs.
- Provides bright, clear illumination suitable for various tasks.
- Easy to install with a standard B22 cap.
- Environmentally friendly due to lower energy consumption.
Cons
- Cool white light (6500K) may be too stark for some users seeking warmer tones.
- Specific dimensions may vary slightly by brand, requiring a quick check for compatibility in very tight fixtures.
- Not dimmable (assuming standard LED behavior without explicit mention).
Setup, Compatibility & Care
Setup:
- Ensure the light fixture is switched off and has cooled down.
- Remove the old bulb by carefully unscrewing it (for screw caps) or pressing and turning counter-clockwise (for bayonet caps).
- Align the B22 cap of the JCB LED bulb with the socket and push upwards, then turn clockwise until it locks into place.
- Switch on the light fixture.
Compatibility:
- Cap Type: Compatible with light fixtures designed for B22 (Bayonet Cap) bulbs.
- Voltage: Assumed to be standard household voltage (e.g., 220-240V), but always check fixture compatibility.
- Environment: Suitable for indoor use in typical household temperatures.
Care:
- Clean only when the bulb is cool and the power is off.
- Use a dry or slightly damp soft cloth to wipe away dust.
- Avoid using abrasive cleaners or solvents.
- Ensure proper ventilation around the bulb as per fixture design.