Grey Brick Effect Wallpaper - Grey - Erismann

This is a 'Paste The Wall' wallpaper. It is recommended to use a suitable adhesive like Erfurt Ready Mix Adhesive, designed for this application method.

The wallpaper is scrubbable. You can clean it gently with a damp cloth or sponge. Avoid abrasive materials or excessive water.

An offset match means that the pattern on each successive strip does not align perfectly at the top and bottom. Instead, it aligns at a half-drop (e.g., 64cm pattern height, 32cm offset), requiring careful alignment between strips for a seamless look.

Yes, this wallpaper is designed to be peelable, which should make removal easier when you decide to redecorate.

Each roll measures 0.53 meters in width and 10.05 meters in length.

While scrubbable, it is best suited for low-moisture areas. For steamy bathrooms, consider wallpapers specifically rated for high-humidity environments.

Always purchase all the rolls you need from the same batch. The product information states that all rolls are perfect and sent from the same batch, but it's good practice to confirm this when ordering.

Ensure the wall is properly pasted and the wallpaper is smoothed out firmly from the center towards the edges to remove trapped air. If minor, try gently pressing down with a clean cloth.

Double-check the offset match direction (64/32cm). Ensure each strip is hung at the correct orientation and that you are using the recommended overlap or butt-joint technique for this specific paper.

Use a slightly damp, soft cloth and gentle circular motions. For stubborn marks, a very mild soap solution can be used sparingly, followed by a clean damp cloth rinse. Avoid harsh scrubbing.

This might indicate insufficient adhesive. Carefully lift the edge and apply more paste to the wall and the back of the paper where needed, then reapply and smooth firmly.