Shopping.co.uk

Pegler VSH XPress Copper Press Fit Gas Street Elbow - 22mm

Pegler VSH XPress Copper Press Fit Gas Street Elbow - 22mm

Pegler Yorkshire VSH xpress gas street elbow is a press-fit fitting used with a pressing tool that...

Best current price£6.30from City Plumbing GB

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular
City Plumbing GB£6.30Visit shop

Vsh Xpress Pegler Copper Press Fit Gas Street Elbow 22Mm Sg12s 39791.

Visit shop

One Offer

1 offer from £6.30

View price history by clicking the chart icon.

City Plumbing GBVsh Xpress Pegler Copper Press Fit Gas Street Elbow 22Mm Sg12s 39791.
Free delivery in 1–3 days
£6.30
Visit shop

Product Information

Full details

This guide is for professional plumbers and gas installers working with internal and external above-ground gas installation pipework. The Pegler VSH XPress Copper Press Fit Gas Street Elbow offers a secure and efficient press-fit connection for copper tubes, significantly speeding up installation time compared to traditional methods. A key consideration is the requirement for a specific pressing tool.

All features

Model Part NumberSG12S
BrandVis Express

Extended Product Information

FAQs

What type of copper tube is compatible with this fitting?

This fitting is designed exclusively for use with copper tubes manufactured to BS EN 1057 standards.

Do I need a special tool to install this fitting?

Yes, a specific Pegler VSH XPress pressing tool with compatible jaws for 22mm fittings is required for installation.

What is the warranty period for this product?

The fitting comes with a 25-year guarantee when used with a copper tube to BS EN 1057 and installed correctly.

Can this fitting be used for water pipework?

No, this fitting is specifically designed and approved for gas installation pipework (2nd and 3rd family gas).

How do I ensure a secure press connection?

Ensure the tube is correctly prepared (cut, deburred, cleaned), fully inserted into the fitting, and that the pressing tool completes its full cycle at the correct location. Visual indicators on the fitting should also be checked.

Are there any specific regulations this fitting meets?

Yes, it meets the requirements of the Gas Safety Regulations 1998 and holds BSI Kitemark certification and DVGW approval.

What is the difference between this and a standard elbow?

This is a 'street elbow', meaning it has one male end and one female end, designed to connect directly to another fitting or pipe end without needing an additional coupling. The key difference is its press-fit installation method.

Troubleshooting

Fitting does not press correctly

Ensure the correct pressing tool and jaws for 22mm fittings are being used. Verify the copper tube is within the BS EN 1057 specification and has been properly deburred and cleaned. Check that the fitting has been fully and correctly inserted onto the tube.

Leak detected after pressing

The joint must be remade. Remove the fitting and inspect the copper tube for damage or deformation. Re-clean, deburr, and re-cut the tube end if necessary before applying a new fitting and re-pressing. Ensure a full press cycle was completed.

Pressing tool malfunction

Refer to the pressing tool's manual for troubleshooting. Ensure the tool is properly charged (if hydraulic/electric) and that the jaws are correctly seated and aligned. Contact the tool manufacturer for service if issues persist.

Corrosion on fitting or pipe

This indicates an environmental issue. Ensure the installation location is suitable and that the pipework is protected from corrosive elements. Replace any affected components and address the source of corrosion.

Pros and Cons

Pros

  • Faster installation times due to press-fit technology.
  • Secure and reliable connections, reducing the risk of leaks.
  • High safety standards met with BSI Kitemark and DVGW approval.
  • Durable construction designed for long-term gas installations.
  • Comprehensive 25-year guarantee provides significant value and confidence.

Cons

  • Requires a specific, specialized pressing tool, adding to initial equipment costs.
  • Strict compatibility requirements with BS EN 1057 copper tubes only.
  • Not suitable for soldered or compression joint applications.
  • Professional installation is essential to maintain warranty and safety standards.

Setup, Compatibility & Care

Setup:

  1. Ensure you have the correct Pegler VSH XPress pressing tool and jaws compatible with 22mm fittings.
  2. Cut the BS EN 1057 copper tube to the required length using a tube cutter.
  3. Deburr the inside and outside edges of the cut tube.
  4. Clean the end of the copper tube thoroughly. Ensure it is free from dirt, grease, or any contaminants.
  5. Mark the insertion depth on the copper tube using a depth gauge or marker.
  6. Slide the VSH XPress gas street elbow onto the copper tube up to the insertion depth mark.
  7. Position the pressing tool jaws over the fitting at the designated pressing point (typically indicated on the fitting).
  8. Activate the pressing tool to compress the fitting onto the tube, creating a secure joint.
  9. Visually inspect the press indication marks on the fitting to confirm a successful press.
  10. Perform a leak test on the completed joint according to gas safety regulations.

Compatibility:

  • Primary Compatibility: Exclusively designed for use with copper tubes manufactured to BS EN 1057.
  • Gas Type: Suitable for 2nd and 3rd family gas installation pipework.
  • Environment: For internal and external above-ground applications.
  • Tooling: Requires a specific Pegler VSH XPress pressing tool and compatible jaws.

Care:

  • Store fittings in a clean, dry environment away from direct sunlight and corrosive substances.
  • Handle fittings with care to avoid damage to the press collar or internal seals.
  • Regularly check the condition of the pressing tool and jaws to ensure they are in good working order.

Price History

DatePrice
Visit shop