AK Interactive Elastic Rigging Hyper-Thin 65ft - 1:350 Ships/1:72 Rigging
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for modelers looking to add realistic rigging to their aircraft, ships, and other models. The AK Interactive Elastic Rigging Hyper-Thin provides an easy-to-use solution for creating detailed and durable rigging, with the flexibility to handle intricate designs. Keep in mind that while the elastic thread is strong, it requires careful handling during application.
All features
| Model Part Number | 9135 |
|---|---|
| Brand | AK Interactive |
Extended Product Information
FAQs
What kind of glue should I use?
Cyanoacrylate glue (super glue) is recommended for securing the elastic rigging to your model.
Can I paint the elastic rigging?
Yes, you can paint the rigging using ink markers or silver paint after it has been applied.
What scales is this rigging suitable for?
This rigging is suitable for 1:72 aircraft and 1:350 / 1:700 ships, among other scales.
How long is the spool of elastic thread?
The spool contains 20 meters (65 feet) of elastic thread.
How do I cut the excess thread?
Use a sharp blade to trim the excess thread after the glue has dried.
How thick is the elastic thread?
The thickness of the thread is 40D (+/- 0,030 mm).
Where should I store the elastic thread?
Store the thread in a cool, dry place away from direct sunlight.
Troubleshooting
Rigging thread is breaking during application.
Reduce the tension when applying the thread and ensure the glue has fully set before stretching it.
Difficulty in getting the thread to stay in place.
Use tweezers to carefully position the thread and apply a small amount of glue. Allow sufficient drying time.
Pros and Cons
Pros
- Easy to install due to its elasticity.
- Provides a realistic appearance for model rigging.
- Can be used across a variety of scales and model types.
- The thin diameter allows for fine detail.
- Can be painted to match the model.
Cons
- Requires careful handling to avoid breakage.
- Excess needs to be cut with a sharp blade, requiring precision.
- May require practice to master application techniques.
- The elastic nature may make it difficult to achieve perfect tension at first.
Setup, Compatibility & Care
- Preparation: Ensure the model surfaces where the rigging will be attached are clean and free of debris.
- Tools: You'll need cyanoacrylate glue (super glue), tweezers, and a sharp blade.
- Application: Cut the elastic thread to the desired length, allowing a little extra for handling. Apply a small amount of glue to the attachment points on your model and carefully place the thread using tweezers. Once the glue has set, trim any excess thread.
- Compatibility: This product is compatible with a wide range of model scales, including 1:72 aircraft and 1:350/1:700 ship models.
- Care: Avoid excessive stretching of the thread to prevent breakage. Store the spool in a cool, dry place away from direct sunlight.
- Painting: If desired, paint the rigging after it has been secured to the model. Use ink markers or silver paint for the best results.