Setup, Compatibility & Care
Compatibility: Always consult your vehicle's owner's manual to confirm if Total Quartz Ineo Xtra FDE 0W-20 meets its specific oil requirements. This oil is approved for: FORD WSS-M2C952-A1, MB-Approval 229.71, and Jaguar Land Rover STJLR.03.5006. It also meets ACEA C5, ACEA C6, and API SP (RC) standards, and is approved under GM dexos®D™. Using oil not specified by your manufacturer can lead to engine damage.
Setup: Ensure the engine is cool before draining old oil. Place a suitable drain pan under the oil drain plug. Remove the drain plug and allow all old oil to drain completely. Replace the drain plug with a new washer if recommended by your manufacturer. Remove the old oil filter and install a new one, ensuring the gasket is lubricated with a thin film of new oil.
Filling: Using a funnel, fill the engine with the specified amount of new oil. Refer to your owner's manual for the exact capacity. Start the engine and let it run for a few minutes, checking for leaks around the drain plug and oil filter. Turn off the engine and wait for a few minutes for the oil to settle. Check the oil level on the dipstick and add more oil if necessary to reach the 'Full' mark.
Care: Regularly check your oil level (e.g., every fuel stop). Change the oil and filter according to your vehicle manufacturer's recommended service interval, or more frequently if operating under severe conditions (e.g., frequent short trips, towing, extreme temperatures). Dispose of used oil responsibly at an authorized collection center.