Promatic Stonechip Aerosol - Black - 500ml
Best current price£12.38from OnBuy.com
Best offers
Shopping.co.uk recommended and popular offers
OnBuy.com£12.38Visit shop Promatic Stonechip Aerosol Scb500 - 500Ml Black 5055574900206
Visit shopOnBuy.com£12.38Visit shop All Offers
2 offers from £12.38
View price history by clicking the chart icon.
OnBuy.comPromatic Stonechip Aerosol Scb500 - 500Ml Black 5055574900206
Free delivery in 1–3 days
£12.38
Visit shop
Promatic Stonechip Black Aerosol Scb500 - 500MlFree delivery in 1–3 days£12.38Visit shop →
Product Information
Full details
The Promatic Stonechip Aerosol in Black (500ml) is designed for automotive applications requiring robust protection. Its key benefit is providing excellent corrosion prevention and resistance to weathering, acids, and alkalines, while also offering noise insulation. A potential consideration is its specific drying times which require adherence for optimal results.
All features
| Colour | Black |
|---|---|
| Model Part Number | SCB500 |
| Brand | Promatic |
| Container Volume | 500ml |
Extended Product Information
FAQs
What is the recommended application temperature?
For best results, apply in temperatures between 10°C and 25°C.
How long does it take to dry?
It is dust-free in 30 minutes, touch dry in 60 minutes, sandable after 2 hours, and can be overcoated after 2 hours.
Can I use this on plastic parts?
While primarily designed for metal, it may adhere to certain plastics. It's recommended to test on an inconspicuous area first or use a plastic primer.
What surfaces can I apply this to?
It can be applied to primed metal, bare metal, and sound existing paintwork. Ensure the surface is clean and degreased.
How much area does one can cover?
One 500ml can covers approximately 1.56 to 2.19 square meters.
Is this product resistant to chemicals?
Yes, it offers resistance against weathering, acids, and alkalines.
How should I clean up spills or overspray?
Clean up wet spills and overspray immediately using a suitable solvent, such as paint thinner or white spirit.
Troubleshooting
Uneven spray pattern or clogging
Ensure the can was shaken thoroughly before and during use. If still clogged, remove the nozzle and soak it in a suitable solvent (like paint thinner), then clear with a fine needle before reattaching. Invert the can and spray briefly after use to prevent nozzle blockage.
Poor adhesion or peeling
Verify the surface was properly prepared (clean, dry, free of rust and grease). Ensure the application temperature is within the recommended range and that subsequent coats were applied within the overcoatable time frame.
Sags or runs in the finish
This is likely due to applying the product too thickly or from too close a distance. Apply in thin, even coats, maintaining the recommended spray distance. Allow adequate drying time between coats.
Pros and Cons
Pros
- Provides excellent protection against corrosion and weathering.
- Offers noise reduction benefits.
- Flexible and durable finish.
- Good adhesion to automotive surfaces.
- Can be painted over for a custom finish.
Cons
- Specific drying times need to be followed.
- Primarily for automotive use; may not be suitable for all applications.
- Requires adequate ventilation during use.
Setup, Compatibility & Care
Setup:
- Ensure the surface is clean, dry, and free from rust, grease, and loose paint.
- Mask off surrounding areas to prevent overspray.
- Shake the aerosol can vigorously for at least two minutes before use.
- Spray from a distance of 25-30 cm, applying in even, cross-coat passes.
Compatibility:
This product is designed for use on primed metal surfaces in automotive applications. It adheres well to bare metal, existing paintwork, and most common automotive primers. It is overcoatable with most automotive paint systems.
Care:
After use, invert the can and spray for a few seconds to clear the nozzle. Store in a cool, dry place away from direct sunlight and sources of ignition. Clean any accidental overspray immediately with a suitable solvent.