Best current price£25.29from eBay
Shopping.co.uk recommended and popular offers
eBay£25.29Visit shop 1x EXHAUST GAS RECIRCULATION VALVE EGR Valve FOR AUDI A2 1.4 Seat 036131503M
Visit shop4 offers from £25.29 - £32.94
View price history by clicking the chart icon.
The Maxpeedingrods Diesel EGR Valve (7TPQOK) is designed for Ford Transit Van and Bus owners operating 2.2 or 2.4 TDCi engines from the 2010-2014 model years. This component is essential for maintaining engine efficiency and emissions compliance by effectively regulating exhaust gas recirculation. While it offers a direct-fit replacement for faulty factory units, installation requires a solid understanding of automotive cooling and intake systems, and professional fitting is recommended to ensure the system is properly calibrated.
| Model Part Number | 7TPQOK |
|---|---|
| Brand | maXpeedingrods |
This valve is compatible with 2.2 and 2.4 TDCi engines found in Ford Transit vans and buses manufactured between 2010 and 2014.
Yes, always use a new gasket during installation to ensure a proper seal and prevent exhaust leaks.
If you have experience with engine cooling and intake systems, yes. However, due to the complexity of Ford Transit engine bays, professional installation is recommended.
EGR valves typically fail due to carbon buildup (soot) that prevents the valve from opening or closing correctly.
No, this part is specifically designed for 2010-2014 models.
Yes, it is highly recommended to use a diagnostic tool to clear error codes and calibrate the new valve to your engine's ECU.
Use an OBDII scanner to clear old fault codes or check if a system reset/re-learn procedure is required for your specific ECU.
Verify that all electrical connections are secure and that the new gasket is properly seated to prevent vacuum leaks.
To install this valve, ensure the engine is completely cool to prevent burns from residual coolant. Begin by locating the EGR unit on the intake manifold and disconnecting the electrical harness. Drain a small amount of coolant if necessary to avoid spills during the swap. When installing, always use a new gasket to ensure an airtight seal. After installation, it is strongly recommended to use a diagnostic scan tool to clear existing EGR error codes from the vehicle's memory and perform any required 're-learn' procedures. To prolong the life of the valve, ensure the engine's air intake system is clean and that the engine is not running excessively rich, as heavy soot buildup is the primary cause of premature valve failure.
