Cooker Hood Vent Hose - White

The hose is designed for a 5-inch (approximately 127mm) vent outlet. The included connector ring provides an option for 5.9-inch (approximately 150mm) connections.

Yes, the hose can be cut to a shorter length if needed. Ensure you make a clean cut and that the connection point remains secure.

No, the kit includes the vent hose and the connector ring. You will need to provide your own suitable clamps or tape to secure the hose to the cooker hood and vent outlet.

This hose is designed for cooker hood ventilation, which expels grease and steam. It is constructed with a PVC sleeve and wire coil, suitable for typical kitchen extraction needs. Extreme heat exposure beyond standard cooking fumes should be avoided.

The hose is highly flexible due to its inner wire coil and outer PVC sleeve. It can be bent and routed around obstacles, but sharp kinks should be avoided to maintain optimal airflow.

The connector coupler ring is a versatile adapter that can be used to connect the 5-inch hose to a 5.9-inch ducting system or vent outlet, providing more flexibility in your ducting setup.

Verify your cooker hood outlet is a standard 5-inch diameter. The included connector ring may provide adaptability if your external ducting is slightly larger (5.9 inches).

Check the hose for kinks, blockages, or grease buildup. Ensure all connections are sealed tightly and that the cooker hood's filters are clean.

Gently flex the hose to warm it slightly. Avoid forcing it; the inner wire coil provides structure but should allow for smooth routing when handled carefully.

Ensure the hose is not rubbing against any surfaces. Secure it properly to prevent vibrations. Check for any internal obstructions.