Best current price£5.99from eBay
Shopping.co.uk recommended and popular offers
eBay£5.99Visit shop Tamiya TS-79 Semi Gloss Clear Acrylic Spray TAM85079
Visit shop3 offers from £5.99 - £14.25
View price history by clicking the chart icon.
The Tamiya TS-79 Semi Gloss Clear spray paint is designed for model enthusiasts looking to achieve a professional semi-gloss finish on larger model surfaces. Its synthetic lacquer formula cures quickly and is compatible with acrylic and enamel paints for detailed work. A key benefit is its ability to provide a smooth, consistent finish ideal for car bodies. However, it is crucial to note that this paint is not suitable for clear Polycarbonate/LEXAN R/C body shells, as it will cause flaking; Tamiya PS spray paint should be used for those applications.
| Model Part Number | 85079 |
|---|---|
| Brand | Tamiya |
Yes, Tamiya TS-79 Semi Gloss Clear is designed for use on plastic model kits, especially for achieving a semi-gloss finish on larger surfaces.
TS spray paints are synthetic lacquers for plastic models. PS spray paints are specifically designed for the inside of clear Polycarbonate/LEXAN R/C car body shells. TS paint will flake off Polycarbonate.
The paint cures quickly, but for best results and to prevent issues when applying further coats (like clear coats over paint), it's recommended to allow up to one week for full curing.
One 100ml can is typically enough to fully cover 2 to 3 model car bodies in a 1/24 scale.
Yes, Tamiya spray paints are not affected by acrylic or enamel paints, allowing you to add details or pick out features after the TS-79 has cured.
It is recommended to test clear coating over a sample decal before applying it to your finished project, as some decals may react to the clear coat.
After use, invert the can and spray for a few seconds until only clear propellant is expelled to prevent clogging.
TS-79 provides a semi-gloss finish. It's useful for achieving this finish on projects that might otherwise only be available in a high-gloss option.
Ensure the can was shaken thoroughly before and during use. The nozzle might be partially clogged; try clearing it by spraying upside down for a few seconds. Test spray on a scrap piece before applying to the model.
The paint was likely applied too thickly or from too close a distance. Apply paint in multiple thin, light coats rather than one heavy coat. Ensure the can is held at the recommended distance.
This is most likely occurring on Polycarbonate/LEXAN surfaces, for which TS paint is not designed. For plastic models, ensure the surface is clean, dry, and free of grease or dust. If painting over existing paint, ensure it is fully cured and compatible.
Immediately after use, invert the can and spray for several seconds until only clear propellant is expelled. If already clogged, soak the nozzle in a compatible solvent (like Tamiya Lacquer Thinner) and then try clearing it again.
Setup: Ensure you are in a well-ventilated area, preferably outdoors or in a spray booth. Shake the can vigorously for at least one minute before and occasionally during use. Hold the can approximately 25-30 cm (10-12 inches) from the model surface. Apply in light, even coats, moving the can continuously.
Compatibility: Tamiya TS-79 is compatible with Tamiya acrylic paints, enamel paints, and other synthetic lacquer-based paints. It is *not* suitable for use on clear Polycarbonate/LEXAN R/C body shells; use Tamiya PS spray paints for these applications.
Care: Store the can upright in a cool, dry place away from direct sunlight and heat sources. After use, clear the nozzle by inverting the can and spraying for a few seconds until only clear propellant emerges. Clean any accidental spills immediately with a suitable solvent.
