Suswe SU-800 VFD Inverter - 1.5Kw - Single Phase to 3 Phase

The Suswe SU-800 VFD Inverter is rated for motors up to 1.5kW (approximately 2 horsepower).

No, this VFD specifically requires a 230V single-phase input supply.

The output frequency can be adjusted using the control panel buttons or by setting external control signals, depending on the configured parameters.

A soft start gradually increases the motor's speed from zero to its set speed, reducing electrical inrush current and mechanical shock on the equipment.

Yes, for optimal performance and protection, you should program the motor's rated voltage, current, and frequency into the VFD's parameters.

Yes, the motor direction can typically be reversed by swapping any two of the three output phase wires (U, V, W) connected to the motor.

Please refer to the product documentation or the retailer for specific warranty information, as it can vary.

Verify the single-phase 230V input power connection is secure and the circuit breaker is engaged. Check that the VFD is correctly wired.

Confirm the motor is correctly wired to the VFD output terminals (U, V, W). Check motor compatibility and ensure the motor is not damaged. Review VFD parameters for motor settings.

Reduce the motor load or check for short circuits in the motor wiring. Ensure the input voltage is within the specified range. Adjust acceleration/deceleration times if they are too short for the load.

Verify the frequency setting is appropriate for the desired speed. Check motor nameplate details and confirm they are correctly entered in the VFD parameters.

Ensure ventilation slots are clear and the ambient temperature is within the VFD's operating range. Check motor load to ensure it does not exceed the VFD's capacity.