Best current price£18.25from Tameson UK
Shopping.co.uk recommended and popular offers
Tameson UK£18.25Visit shop Schneider Electric Green Harmony Selector Switch Front Element - Zb4bk1333
Visit shop5 offers from £18.25 - £66.91
View price history by clicking the chart icon.
This Schneider Electric Harmony XB4 selector switch is designed for professionals managing lighting and switching functions in industrial environments. Its key benefit is providing reliable, multi-position control with robust IP ratings for durability. A potential caveat is its specific 22.5mm mounting requirement, limiting its use to compatible panels. This illuminated switch features a short rotary handle, latching actuation, and a green control element, offering clear visual feedback and secure operation.
| Brand | Schneider Electric |
|---|
These ratings indicate robust protection: IP66 (dust-tight, protected against strong water jets), IP67 (protected against temporary immersion in water), and IP69K (protected against high-pressure, high-temperature washdowns).
This type of switch is primarily designed for control circuits, such as signaling, lighting control, or pilot functions, not for direct high-power load switching.
Latching actuation means the switch stays in the position it is set to (e.g., On or Off) until it is manually moved to another position. This is in contrast to momentary switches that return to a default position when released.
In control systems, green often signifies 'start', 'on', or 'normal operation'. The color is chosen for clear visual distinction and association with specific functions.
The Harmony XB4 series often allows for interchangeable heads and lenses. However, confirm compatibility with specific Schneider Electric accessories for color changes.
The switch is designed to operate reliably in a wide temperature range, from -40°C to +70°C.
Yes, due to its high IP ratings (IP66, IP67, IP69K), it is well-suited for demanding outdoor applications where it may be exposed to various weather conditions and cleaning processes.
Verify that the actuator is properly engaged and that there are no obstructions. Check that the internal latching mechanism is functioning correctly.
Confirm that the correct voltage is supplied to the illumination circuit of the switch. Check wiring connections and ensure the bulb (if applicable) or LED is functional and properly seated.
Re-tighten the mounting nut or securing clip. Ensure the 22.5mm hole is clean and correctly sized for a snug fit.
Inspect the seal between the front element and the panel, and where the rear body attaches. Ensure all connections are properly tightened and that no damage has occurred to the housing or seals.
Setup:
Compatibility:
Care:
