Best current price£7.99from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£7.99Visit shop Slips Away Non Slip Bath & Shower Anti Skid Stickers 8X Black Strips
Visit shop1 offer from £7.99
View price history by clicking the chart icon.
The Slips Away Non Slip Bath and Shower Anti Skid Stickers are designed for homeowners seeking a reliable safety solution to prevent accidents in wet environments. These strips provide superior traction on smooth surfaces like bath tubs and shower trays through a high-grip textured design, though they require a completely dry and clean surface for optimal long-term adhesion.
| Colour | Black |
|---|---|
| Model Part Number | SA007 |
| Brand | Slips Away |
Yes, they provide extra traction which is helpful for children, though adult supervision is always recommended in the bathroom.
These are designed for smooth, non-porous surfaces. They may not adhere correctly to rough or highly textured stone surfaces.
Use a hair dryer on a low heat setting to warm the adhesive, then gently peel the strip away. Use an adhesive remover if any residue remains.
The pack includes 8 individual black anti-skid strips.
They are designed to be safe for standard acrylic and enamel bathtubs; however, caution should be used when removing them to avoid scratching the surface.
Yes, they are resistant to most household cleaning agents, but avoid using harsh abrasive pads that could damage the texture.
The surface was likely not fully clean or dry. Remove the strip, clean the area with isopropyl alcohol, ensure it is bone-dry, and apply a new strip.
This often happens if the surface was not properly prepared. Ensure future applications are pressed down firmly and that the adhesive cures for a full 24 hours without water contact.
Before installation, ensure the bath or shower tray is completely free of soap residue, oils, or grime. Use an alcohol-based cleaner to wipe down the surface and allow it to dry thoroughly, as moisture trapped beneath the adhesive will cause the strips to peel prematurely. Once applied, press down firmly across the entire surface of each strip to remove air bubbles. Avoid using the shower or bath for at least 24 hours to allow the adhesive to fully bond. For maintenance, clean the strips using a soft brush or sponge with a mild, non-abrasive detergent to prevent the buildup of mold or soap residue.
