Best current price£12.75from B&Q
Shopping.co.uk recommended and popular offers
B&Q£12.75Visit shop B&Q - Vitrail 45Cm X 1.5M Static Cling Vinyl Window Film For Privacy And Décor
Visit shop2 offers from £12.75 - £14.49
View price history by clicking the chart icon.
This d-c-fix Self Adhesive Vitrail Window Privacy Film in White is ideal for homeowners and renters looking to enhance privacy and add decorative flair to windows, glass doors, and shower screens without sacrificing natural light. Its key benefit is providing a beautiful stained-glass effect while offering 95% UV protection and glare reduction. A minor caveat is the need to allow a small gap at the edges to ensure proper adhesion and longevity.
| Colour | White |
|---|---|
| Model Part Number | 437482 |
| Brand | d-c-fix |
It's crucial to clean the glass thoroughly and spray it generously with water. After application, use a squeegee to remove all excess water. Importantly, ensure you leave a 5mm gap between the edge of the film and the rubber seal of the window or door to prevent premature peeling.
Yes, this film is suitable for shower screens as it enhances privacy and is water-resistant once applied. Ensure the glass is clean and smooth before application.
The film offers 95% UV protection, which helps to prevent fading of interior furnishings and decor caused by direct sunlight.
With proper application and care, the film can last for several years. Its longevity can be influenced by environmental factors such as direct sunlight intensity and temperature fluctuations.
Yes, as it uses a static cling method with water application, the film can be removed without residue and reapplied to a different clean glass surface, provided it has been stored carefully.
No, the Vitrail effect provides privacy by obscuring the view from the outside while still allowing light to pass through. It does not completely block vision in either direction, but rather diffuses it.
Clean the film gently with a soft cloth dampened with mild soap and water. Avoid using abrasive cleaners, scouring pads, or sharp objects that could damage the surface.
Gently lift the edge of the film near the bubble and use a squeegee to push the air out towards the nearest edge. If stubborn, you may need to reapply by lifting the film entirely, re-wetting the glass, and reapplying.
Ensure the glass was thoroughly cleaned and sufficiently wet before application. Re-wet the glass and the adhesive side of the film, then reapply. Check that the film is not touching any rubber seals around the window or door frame.
Use a sharp craft knife or utility blade and a metal ruler for straight cuts. Measure carefully before cutting.
This may be due to excess water trapped beneath the film. Ensure all excess water is squeegeed out towards the edges. The film should become clear as it dries completely.
Setup:
Compatibility:
This film is designed for use on clean, smooth, non-porous glass surfaces. It is suitable for windows, glass doors, shower screens, and cabinet doors.
Care:
To clean the film, use a mild soap and water solution with a soft cloth or sponge. Avoid abrasive cleaners or tools that could scratch the film. The film can be removed by gently peeling it away from the glass. If residue remains, it can be cleaned with standard household glass cleaners.
