Shimano Spares WH-MT600-TL-R12 Spoke - 281 mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The Shimano WH-MT600-TL-R12 281mm spoke is an essential replacement component for mountain bikers and mechanics maintaining the specific WH-MT600-TL-R12 wheelset. It provides the precise tension and structural integrity required to keep your rear wheel true and reliable under trail stress, though users must ensure they are selecting the correct length for their specific wheel configuration to avoid fitment issues.
All features
| Model Part Number | Y0G2S2000 |
|---|---|
| Brand | Shimano |
Extended Product Information
FAQs
Is this spoke compatible with other Shimano wheelsets?
This spoke is specifically engineered for the WH-MT600-TL-R12 model. Compatibility with other wheelsets is not guaranteed.
Does this package include a replacement nipple?
No, this part is for the spoke only. Ensure your existing nipple is in good condition before installation.
What tool do I need to install this?
You will need a standard bicycle spoke wrench sized appropriately for Shimano factory wheel nipples.
Can I use this for both the front and rear wheels?
No, this specific length is intended for the rear MT600-TL-R12 wheelset configuration.
Should I apply grease to the threads?
Applying a small amount of grease or anti-seize to the threads is recommended to prevent corrosion and facilitate future adjustments.
Troubleshooting
Spoke is too short or too long
Verify that you are replacing the correct spoke for the rear-drive side, as length requirements vary by wheel position.
Nipple won't thread onto the new spoke
Check the threads on both the new spoke and the existing nipple for debris or damage; ensure the nipple is not cross-threaded.
Wheel continues to wobble after installation
The wheel likely requires a full truing process; adjust the tension of surrounding spokes to achieve optimal balance.
Pros and Cons
Pros
- Exact OEM specification ensuring compatibility
- High-grade material for long-term fatigue resistance
- Reliable, consistent performance under trail stress
Cons
- Specific to the WH-MT600-TL-R12 model only
- Requires proper spoke wrench for installation
- Does not include replacement nipples
Setup, Compatibility & Care
To ensure a successful installation, confirm that you are replacing a spoke on the correct side of the WH-MT600-TL-R12 wheelset, as length requirements can vary between drive and non-drive sides. Always use a calibrated spoke wrench to prevent stripping the spoke nipple. For long-term care, apply a light touch of spoke prep or a thin layer of grease to the threads during installation to prevent seizing and to facilitate easier tension adjustments in the future. Check wheel trueness periodically after the first few rides following a spoke replacement to ensure the wheel has settled properly.