Tecnosel Graphics Kit - Kawasaki KX125 1992-1993 - Green/Multi/Red

The graphics are made from a transparent material, printed on the back to ensure durability and resistance to wear and tear.

This specific kit is designed for the Kawasaki KX125 models from 1992-1993. Compatibility with other models is not guaranteed.

The graphics are very resistant to wear and tear, designed for off-road use. Lifespan depends on riding conditions and care, but they are built for durability.

While not strictly required, professional installation can ensure the best possible finish. However, with careful attention to the setup instructions, DIY application is achievable.

Please refer to the retailer's or Tecnosel's official warranty policy for specific details, as warranty information is not provided in the product description.

The graphics are designed for long-term adhesion. Removal may require heat (like a hairdryer) and careful peeling to avoid damaging the underlying plastic.

Gently lift the edge of the graphic where the bubble is and reapply, using a squeegee to smooth it out. For small bubbles, a pinprick can release trapped air, followed by pressing the graphic down firmly.

Ensure the plastic surface was thoroughly cleaned and dried, free from any residues. Reheating the graphic slightly with a hairdryer on a low setting can sometimes improve adhesion, followed by firm pressure.

Use masking tape to temporarily hold the graphic in place before removing the backing. Measure and mark reference points on the bike's plastics if needed. Take your time and have a second person assist if possible.