SSD Converter - 12+6Pin to M.2 KEY-M
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This adapter is for users with 2013-2017 Apple devices who want to upgrade or utilize their original SSDs with modern M.2 NVMe setups. Its key benefit is enabling compatibility with newer systems, offering PCI-E 4.0 speeds. A caveat is that original SSDs may require specific software for access in non-Apple environments.
All features
| Model Part Number | DOESNOTAPPLY |
|---|---|
| Brand | Unbranded |
Extended Product Information
FAQs
Can I use this adapter with any M.2 NVMe SSD?
No, this adapter is specifically designed to convert Apple's proprietary 12+6Pin SSDs to an M.2 KEY-M interface. It is not for use with standard M.2 NVMe SSDs.
Will my original Apple SSD work as a boot drive in Windows?
While the adapter enables physical connection, original Apple SSDs may require specific software or drivers to be recognized as bootable drives in Windows. Compatibility can vary, and it's often easier to use them as secondary storage.
What is the maximum speed I can expect?
The adapter supports PCI-E 4.0 speeds. The actual speed will depend on the capabilities of your motherboard's M.2 slot and the performance specifications of the original Apple SSD.
Do I need a special enclosure for this adapter?
This adapter is designed to be installed directly into a motherboard's M.2 slot. It is not intended for use in standard external M.2 NVMe enclosures, as they may not support the AHCI protocol required by the Apple SSD.
What does the 22110 size refer to?
22110 is the physical dimension of the M.2 card, measuring 22mm in width and 110mm in length. Your motherboard's M.2 slot must support this specific size.
Can I use this in a laptop's M.2 slot?
Typically, laptop M.2 slots are designed for smaller form factors like 2280. The 22110 size of this adapter is unlikely to fit in most laptop M.2 slots. It is primarily intended for desktop motherboards.
Troubleshooting
SSD not detected by the operating system
Ensure the adapter is fully seated in the M.2 slot. Verify the M.2 slot on the motherboard supports NVMe and PCI-E 4.0. Check BIOS settings to ensure the M.2 slot is enabled. For original Apple SSDs, ensure you have the necessary drivers or software installed for your OS.
Slow read/write speeds
Confirm the M.2 slot supports PCI-E 4.0 speeds and the adapter is properly installed. Ensure the SSD itself is capable of high speeds. Check for any software limitations or background processes consuming resources.
Adapter physically does not fit the M.2 slot
Verify that your motherboard's M.2 slot supports the 22110 form factor. Some motherboards only support 2280 or 2260 sizes. Consult your motherboard's manual.
Data corruption or read errors
Ensure stable power to the system. Try reformatting the SSD (backing up data first) using appropriate software if it's an original Apple SSD. Test the SSD in another compatible slot or system if possible.
Pros and Cons
Pros
- Enables the use of older Apple SSDs in new systems.
- Supports high PCI-E 4.0 transfer speeds.
- Compatible with multiple operating systems.
- Offers a cost-effective upgrade path for storage.
Cons
- Original SSDs may require software for data access in non-Apple systems.
- Cannot be directly plugged into standard NVMe enclosures without proper protocol support.
- The 22110 riser card size may not fit all M.2 slots.
- Requires careful attention to compatibility notes to avoid issues.
Setup, Compatibility & Care
Setup:
- Carefully remove the original SSD from your compatible Apple device.
- Insert the Apple SSD into the 12+6Pin connector on the adapter.
- Install the adapter into an available M.2 KEY-M slot on your motherboard. Ensure the slot supports PCI-E NVMe drives and the 22110 form factor.
- Connect to your operating system. For original SSDs, you may need specific software for initial read/write operations or reformatting.
Compatibility:
- Supported Apple SSDs:
- 2013-2014 MacBook Air (A1465, A1466)
- 2013-2014 MacBook Pro Retina (A1398, A1502)
- 2013 MacBook Pro (A1493, A1502)
- Motherboard M.2 Slot: Must be KEY-M, support NVMe/PCI-E, and ideally accommodate the 22110 form factor.
- Operating Systems: Windows 10/11, for OS, Linux.
Important Notes:
- Do NOT plug this adapter with an Apple SSD into a standard NVMe SSD enclosure unless explicitly stated to support the AHCI protocol used by these drives.
- Original Apple SSDs might not be recognized for boot or storage without appropriate software drivers or formatting in non-Apple environments.
Care:
- Handle the adapter and SSD with care, avoiding static discharge.
- Keep the adapter in a clean, dry environment. Avoid exposure to moisture or extreme temperatures.