Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and old flaking paint. Lightly sand glossy surfaces to improve adhesion. Use a suitable primer if painting over dark or stained surfaces, or for bare plaster/wood.
Application: Stir the paint thoroughly before use. Apply with a brush, roller, or sprayer. Two coats are generally recommended for best results. Allow adequate drying time between coats (typically 2-4 hours, depending on conditions).
Compatibility: Suitable for interior walls, ceilings, metal radiators, interior woodwork, and furniture. Not intended for exterior use.
Care: Clean up spills and equipment with water immediately after use. For maintenance, wipe surfaces gently with a damp cloth. For stubborn marks, use a mild detergent solution and a soft sponge, then rinse with clean water. Avoid abrasive cleaners or scouring pads.