Karcher K Series Pressure Washer Lance - Vario Nozzle

This lance is designed for Karcher K Series pressure washers and is compatible with all Karcher K Series trigger guns that utilize the standard quick-connect fitting.

To adjust the spray pattern, simply twist the head of the vario nozzle. Rotating it changes the spray from a focused jet stream to a wider fan spray.

Yes, this lance is designed for regular pressure washer use and supports high-pressure cleaning. The focused jet setting provides concentrated power for tough jobs.

No, this lance is specifically designed for Karcher K Series pressure washers and trigger guns and is not compatible with other brands.

If the nozzle appears clogged, first disconnect the lance. You can try rinsing it with clean water. If debris is visible, gently try to dislodge it with a soft brush or toothpick, being careful not to damage the nozzle mechanism.

The vario nozzle offers versatility by allowing you to adjust the spray pattern on the fly without needing to swap out different fixed nozzles, making it convenient for a range of cleaning tasks.

To detach, typically you would press the release button on the trigger gun while pulling the lance away. Refer to your specific Karcher trigger gun manual for precise instructions, as the mechanism may vary slightly.

Ensure the trigger gun is a Karcher K Series model with the correct quick-connect system. Check the connection point on both the lance and trigger gun for debris or damage. Apply firm pressure until you hear a click.

Twist the nozzle head firmly but carefully. If it feels stuck, check for any obstructions. Ensure the lance is fully connected to the trigger gun, as a loose connection can affect performance.

Verify that the lance is securely attached. Check the pressure washer's water supply and hose connections. Ensure the main pressure washer unit is functioning correctly and the vario nozzle is not set to its widest fan setting, which naturally reduces pressure intensity.

Check the O-ring seal within the quick-connect fitting on the lance or trigger gun for wear or damage. Ensure the connection is fully engaged. If the seal is damaged, it may need replacement.