Living and Home Electric Drywall Sander with Vacuum Dust Collection

The sander uses a hook and loop system. Simply peel off the old sandpaper and attach a new piece.

Use hook and loop sandpaper. The grit of the sandpaper depends on the project. Start with a coarser grit for removing material quickly and switch to finer grits for smoothing.

The sander has an adjustable speed setting. Use the control to select the speed appropriate for your task and material.

Empty the dust bag regularly, ideally after each use, or when it becomes about half full to maintain optimal dust collection performance.

While the sander is primarily designed for drywall and wall putty, it can be used on wood. Adjust the speed and use the correct sandpaper to suit the material.

This product comes with a warranty. Please refer to your purchase documentation for specific details.

Wipe the exterior of the sander with a damp cloth. Do not immerse in water. Make sure the sander is unplugged before cleaning.

Check that the power cord is securely plugged into a working outlet. Also, ensure the power switch is in the 'on' position.

Check the dust bag to see if it is full and needs emptying. Also, ensure the hose is properly connected and free of obstructions. Inspect the suction control knob and make sure it is set to a suitable level.

Reduce the sanding speed. Use finer grit sandpaper and apply even pressure. Ensure the sandpaper is properly attached and in good condition.

Check that the sanding disc is securely attached. Inspect the sanding pad for damage.