Best current price£36.78from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£36.78Visit shop Pir Sensor Outdoor Ip65 - Surface Ceiling Wall Mounted, Programmable, 20M/360 - Infrared Motion Sensor For Led Lights With 3 Sensors, 3-Wire 4260676353824
Visit shop1 offer from £36.78
View price history by clicking the chart icon.
The SEBSON PIR Sensor Outdoor IP65 is designed for outdoor security and lighting automation, offering precise detection of people, animals, and vehicles. Its key benefit is a versatile 360° coverage with a 20m range, adaptable to various environments. A minor caveat is the need for professional installation to ensure optimal performance and safety, especially concerning its high power compatibility.
| Model Part Number | PIR Sensor Outdoor IP65 |
|---|---|
| Brand | SEBSON |
The sensor has a maximum detection range of 20 meters.
Yes, it is compatible with LED lamps, with a maximum power consumption of 1,000W for LEDs and other energy-saving lamps.
Yes, it has an IP65 protection class, making it dust-tight and protected against water jets, ideal for outdoor environments.
The sensor can be swiveled 180° vertically, and the detection range can be shortened by using a modified cover. You can also adjust the sensitivity based on ambient brightness.
The duty cycle can be set from 10 seconds up to 30 minutes, or it can be set to stay on permanently.
Professional installation is recommended due to electrical wiring requirements to ensure safety and optimal performance.
It is designed to detect people, large animals, and vehicles thanks to its three integrated sensors.
Check power supply and wiring connections. Ensure the `LUX` setting is low enough for current ambient light conditions. Verify that the connected lights do not exceed the maximum wattage limit. Test the `TIME` setting by setting it to the shortest duration.
Check the `TIME` dial; ensure it is not set to permanent 'on'. Inspect for continuous movement within the detection zone or a faulty sensor. Reset the sensor by briefly cutting power.
Adjust the `LUX` setting to a higher value if triggering during daylight. Reduce the detection range by adjusting the sensor head or using the range cover. Ensure the sensor is not aimed at heat sources or moving objects like trees swaying in the wind.
Verify power supply and wiring. Ensure the `TIME` dial is not set to permanent 'off'. Check that the detection range is adequately set and unobstructed. Ensure the sensor is not pointing towards obstructions.
Setup: Professional installation is recommended due to electrical connections. Mount the sensor securely on a wall or ceiling at the desired height, ensuring the detection area is unobstructed. Wire the sensor according to the manufacturer's instructions, paying close attention to the maximum power ratings for incandescent (2,000W) and LED/energy-saving lamps (1,000W). Adjust the `LUX` setting to control the ambient light level at which the sensor activates, and set the `TIME` dial for the desired duration the connected light stays on. The detection range can be fine-tuned by adjusting the sensor head or using the provided cover.
Compatibility: This sensor is compatible with standard incandescent, LED, and other energy-saving lamps, provided their total wattage does not exceed the specified limits.
Care: Keep the sensor lens clean by gently wiping it with a soft, damp cloth. Avoid using abrasive cleaners or solvents, which can damage the sensor housing or lens. Ensure the mounting is secure and connections remain dry, especially given its IP65 rating.
