Best current price£7.17from eBay
Shopping.co.uk recommended and popular offers
eBay£7.17Visit shop Gewiss GW 62 492 90 Surface Mounting Socket 3 Pole - NEW
Visit shop
The Range£25.51Visit shop Gewiss Low Voltage Screw Wiring 90 Degree Angled Socket-Outlet, Ip44, 3P+N+E, 32A - Gw62493 For Indu - Grey
Visit shop4 offers from £7.17 - £27.46
View price history by clicking the chart icon.
The Gewiss GW62493 is a high-performance, 90-degree angled surface-mounting socket-outlet designed for industrial professionals requiring reliable power distribution in demanding environments. Ideal for heavy-duty workshops and commercial facilities, this unit offers a robust 32A capacity and 400V rating while ensuring safety through strict adherence to IEC 60309 standards. While it provides excellent durability and protection, users should note that its IP44 rating means it is splash-proof rather than fully waterproof, necessitating careful placement away from direct high-pressure water streams.
| Model Part Number | GW62493 |
|---|---|
| Brand | Gewiss |
The 6h reference refers to the earthing contact position according to the IEC 60309 standard, indicating the ground pin is at the 6 o'clock position.
It is rated IP44, which means it is protected against solid objects over 1mm and water splashes from any angle. It is suitable for semi-protected outdoor areas but not for direct, heavy rain or submersion.
This stands for 3 Phases, Neutral, and Earth (T), indicating it is a 5-pin socket-outlet.
The rated voltage for this model is 400V.
Yes, the unit features unlosable screws designed to keep the assembly intact during and after installation.
Verify the internal screw terminals are tightened correctly and check if the cable gland is properly securing the cable jacket.
Although rated IK08 for impact, any visible cracks compromise the IP44 rating and safety; the unit should be replaced immediately.
Check that the plug is a compatible IEC 60309 32A unit and ensure there is no debris inside the pin housing.
Installation of the GW62493 must be performed by a qualified electrician to ensure safety and code compliance. Ensure the surface is flat and the mounting screws are tightened to hold the unit firmly. When wiring, strip the conductors to the manufacturer's specified length and secure them firmly under the anti-loosening terminals. For care, perform routine inspections every six months to verify that terminal screws remain tight and that the cable gland is still providing an effective seal against dust and moisture. Wipe the exterior with a dry cloth; avoid using solvents that might degrade the high-quality industrial plastic casing.
