Best current price£16.38from OnBuy.com
Shopping.co.uk recommended and popular offers
OnBuy.com£16.38Visit shop Q Max Sheet Metal Punch 11Mm Anti-Corrosive Surface Finish 8800215738918
Visit shop
The Range£17.41Visit shop Q.max Sheet Metal Punch 11Mm - Grey
Visit shop21 offers from £16.38 - £19.72
View price history by clicking the chart icon.
The Q.Max 9/16-inch sheet metal punch is designed for metalworkers, electricians, and DIY hobbyists who require precise, burr-free holes in sheet metal up to 16 gauge. This tool offers the primary benefit of creating clean, professional-grade imperial-sized holes without the need for secondary filing or finishing. Users should note that this tool requires a separately purchased 7/32-inch hexagonal wrench for operation, and it is intended specifically for thin sheet materials rather than heavy-duty plate steel.
| Model Part Number | 1313841 |
|---|---|
| Brand | Q.Max |
This punch is intended for standard sheet metal up to 16 gauge. It may struggle with hardened stainless steel; verify the hardness of your material before use.
No, the 7/32-inch hexagonal wrench required to operate the tool is not included.
Mark the center of your hole clearly with a punch or scribe before drilling the pilot hole to ensure accuracy.
While it is designed for metal, it may work on softer plastics, though results may vary and you should test on a scrap piece first.
The punch is rated for use on sheet metal up to 16 gauge.
Ensure the pilot hole is perfectly centered and the screw threads are clean and lubricated.
Verify that you are not exceeding the 16-gauge material limit and ensure the die is fully flush against the surface.
Setup requires a drill, a compatible drill bit for the pilot hole, and a 7/32-inch hex wrench. This punch is strictly compatible with sheet metal up to 16 gauge in thickness; attempting to use it on thicker materials may damage the threads or dull the cutting edges. To maintain the tool, wipe the punch and die clean after every use to remove metal shavings. Store the punch in a dry, low-humidity area to maintain the integrity of the anti-corrosive finish. Occasionally applying a drop of light machine oil to the hexagonal screw threads will prevent binding and make the punching process feel significantly smoother.
