AB Tools Trailer Brake Cable Connector - 700mm Outer Sheath
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This AB Tools Trailer Brake Cable Connector is designed for trailer owners needing a reliable replacement for ALKO braking systems. Its key benefit is a durable construction with a fixed eyelet and M8 thread for secure attachment, ensuring consistent braking performance. A potential caveat is its specific compatibility with ALKO systems. Key features include a 700mm outer sheath, a 1000mm inner cable with a protective blue sleeve, a detachable ALKO eyelet connector, and an M8 threaded end with nuts.
All features
| Model Part Number | BC46 |
|---|---|
| Brand | AB Tools |
Extended Product Information
FAQs
What type of braking system is this cable designed for?
This brake cable is specifically designed for trailers equipped with ALKO braking systems.
What are the measurements of the cable?
The outer sheath measures 700mm from shoulder to shoulder, and the inner cable has an overall total length of 1000mm.
Does this cable come with all necessary hardware for installation?
Yes, it includes a detachable ALKO eyelet connector, an M8 threaded end, and nuts for attachment. Replacement M8 spherical nuts are also included.
Can this cable be used for any trailer?
It is most suitable for trailers with ALKO braking systems. Compatibility with other systems may vary and is not guaranteed.
How do I clean and maintain the brake cable?
Periodically inspect the cable for damage and keep the threaded connection clean. A light lubricant can be applied to the threads if needed, but avoid contaminating the braking mechanism.
What is the purpose of the blue protective sleeve?
The blue protective sleeve on the inner cable is designed to enhance its lifespan by protecting it from wear and environmental damage.
Is this a single brake cable or a pair?
This listing is for a single brake cable.
Troubleshooting
Brake cable is too loose or too tight.
Adjust the tension by repositioning the M8 nuts on the threaded end. Refer to your trailer's braking system manual for specific tension guidelines.
Eyelet connector does not fit the ALKO system.
Confirm that the trailer's braking system is indeed an ALKO model. Ensure the eyelet is correctly aligned and not obstructed.
Inner cable appears stiff or difficult to move.
Check for kinks or damage to the outer sheath or the blue protective sleeve. Ensure the cable is routed correctly without sharp bends. A small amount of lubricant may help if the issue is minor stiffness.
M8 thread is difficult to engage with nuts.
Ensure the threads are clean and free from debris or rust. If necessary, clean the threads or use a thread lubricant. Confirm you are using the correct M8 nuts provided.
Pros and Cons
Pros
- Designed specifically for ALKO braking systems, ensuring proper fit and function.
- Durable steel construction provides a long service life.
- Includes all necessary connectors and nuts for installation.
- Protective sleeve on the inner cable enhances durability.
- Suitable for trailer brakes, drums, and axles.
Cons
- Limited compatibility, primarily suited for ALKO systems.
- Specific cable lengths may not suit all trailer configurations.
- Requires basic mechanical understanding for installation.
Setup, Compatibility & Care Instructions
Setup:
- Ensure the trailer is safely supported and the braking system is disengaged.
- Locate the existing brake cable connection point on the trailer's braking mechanism.
- Attach the eyelet connector of the new cable to the appropriate point on the ALKO system.
- Thread the M8 end of the cable through the guide or mounting point towards the handbrake lever or actuator.
- Secure the M8 threaded end using the provided nuts. Adjust tension as per the trailer's braking system manual.
Compatibility:
- Primary Compatibility: ALKO braking systems.
- Trailer Types: Suitable for caravans, utility trailers, horseboxes, and other trailers utilizing ALKO braking mechanisms.
- Braking Components: Compatible with ALKO trailer brakes, drums, and axles.
Care:
- Periodically inspect the cable for any signs of fraying, corrosion, or damage to the outer sheath.
- Ensure the protective blue sleeve remains intact.
- Keep the threaded connection point clean and free from excessive rust. Apply a light lubricant if necessary, being careful not to contaminate the brake mechanism.
- Check the tension of the cable regularly as part of routine trailer maintenance.