Winmau Maverick Darts - 23g

No. These are steel-tip darts and are strictly for use on traditional bristle dartboards. Using them on an electronic board will damage the sensors.

Yes, the Pro Force shafts use a standard 2BA thread and can be easily replaced if they break or if you want to experiment with different lengths.

Short shafts generally reduce the amount of air resistance behind the flight, making the dart feel more responsive and tighter in flight.

Weight is personal preference. 23g is considered a 'mid-range' heavy weight, offering a good balance between speed and impact power. If you find your darts are arching too much, you may prefer a lighter barrel.

The Maverick 23g barrels measure 7.35mm in diameter and 48.3mm in length.

Check your dart tip for signs of dulling; use a dart sharpener to lightly hone the point to a taper, ensuring you do not remove too much material.

Ensure the flights are pushed fully into the shaft slot. If the shaft slot has become too wide, consider using a flight punch or small flight rings to secure them in place.

Verify that the flights are perfectly perpendicular (90-degree angle). If they are damaged or bent, replace them with a fresh set of Prism Alpha flights.