Hansgrohe Vernis Shape Thermostatic Bar Diverter Mixer Shower - Chrome

A thermostatic shower mixer maintains a set water temperature, preventing sudden and potentially dangerous changes in temperature (like scalding hot or freezing cold water) due to fluctuations in the water supply.

This system features a diverter, typically integrated into the mixer handle or a separate control, which allows you to switch the water flow between the overhead shower and the hand shower.

An 'exposed' shower mixer means the main body of the mixer is visible on the wall surface, with water pipes connecting directly to it. This is often easier to install and maintain compared to concealed mixers.

Yes, the large overhead shower has an adjustable angle, allowing you to direct the spray to your preferred position for optimal comfort.

Hansgrohe provides a five-year manufacturer's warranty on this product, covering defects in materials and workmanship, subject to their terms and conditions.

The QuickClean nozzles have flexible silicone inserts. To remove limescale or dirt, simply rub the surface of the nozzles with your finger or a soft cloth. This loosens any buildup.

No, this specific model (Hansgrohe Vernis Shape Thermostatic Bar Diverter Mixer Shower) is designed as a shower system and does not include a bath filler spout.

Ensure the thermostatic mixer is correctly installed and that both hot and cold water supplies are adequate and balanced. Check for any kinks in the hoses that might restrict water flow. If the issue persists, consult the manual or a professional plumber.

Check the main water supply to your home. Ensure there are no closed valves. Inspect the shower hoses and the showerheads for any blockages, particularly limescale buildup in the QuickClean nozzles. Clean the nozzles as per the care instructions.

Verify that the thermostatic cartridge is properly seated and the temperature control handle is correctly aligned. If the safety stop mechanism seems faulty, contact Hansgrohe customer support or a qualified service technician.

Carefully check all connections for tightness. Ensure rubber seals or washers are correctly in place and not damaged. If leaks persist, you may need to replace a seal or fitting. Refer to the installation guide or seek professional assistance.