Best current price£16.44from eBay
Shopping.co.uk recommended and popular offers
eBay£16.44Visit shop SPEEDFIT MDPE 20mm Straight Connector - UG401B - Bag of 2 - FREE 1 Day Delivery
Visit shop
The Range£16.85Visit shop John Guest Speedfit Blue Straight Connector 20Mm Ug401b (Pack Of 2) - Grey
Visit shop8 offers from £16.44 - £80.08
View price history by clicking the chart icon.
The John Guest Speedfit Blue Straight Connector (1328001) is designed for professional plumbers and DIY enthusiasts working on cold water service lines using MDPE piping. It provides a reliable, secure connection through a specialized push-fit system that significantly reduces installation time, though it is strictly limited to cold water applications and requires the use of pipe inserts for a proper seal.
| Model Part Number | 1328001 |
|---|---|
| Brand | John Guest Speedfit |
No, this specific model is designed exclusively for cold water service applications.
Yes, pipe inserts are required when using MDPE piping to ensure the structural integrity of the connection.
Yes, the push-fit design is fully demountable, allowing you to remove and reinstall the connector if needed.
No, the Speedfit system is designed to be installed by hand without specialized tools.
Yes, it is designed for ground-based plumbing setups, provided all local regulations regarding underground joints are followed.
Ensure the pipe is cut square and free from burrs. Check that the collet is in the correct open position and that you are using the correct size 25mm insert.
Remove the pipe, inspect the O-ring for debris or damage, ensure the pipe surface is smooth/undamaged, and re-insert firmly until it bottoms out.
Ensure the collet is pushed fully into the fitting body evenly while simultaneously applying a firm pulling force on the pipe.
To ensure a leak-free installation, ensure the MDPE pipe end is cut square and is free of burrs or surface debris. Always utilize the correct John Guest pipe insert for 25mm MDPE pipe before pushing the pipe into the fitting. Push the pipe firmly into the connector until it bottoms out against the internal stop. No specialized tools are needed. To demount, push the collet against the body of the fitting while pulling the pipe out. The fitting should be inspected for debris periodically if removed during system maintenance.
